cnpaf.net - 中国协议分析网

投递文章 投稿指南 RSS订阅 网站通告:
搜索: 您的位置主页>协议大全>NAT协议>阅读文章

在cisco2621路由器上配置NAT

09-10 11:46 来源: 作者: 【 评论:0 浏览:
Router#sh run
  Building configuration...
  
  Current configuration:
  !
  version 12.0
  service timestamps debug uptime
  service timestamps log uptime
  no service password-encryption
  !
  hostname Router
  !
  !
  username zzf7681
  !
  !
  !
  !
  ip subnet-zero
  !
  !
  !
  !
  interface FastEthernet0/0
  ip address 218.28.3.134 255.255.255.252
  no ip directed-broadcast
  ip nat outside
  duplex auto
  speed auto
  !
  interface FastEthernet0/1
  ip address 200.4.3.10 255.255.255.0
  no ip directed-broadcast
  ip nat inside
  duplex auto
  speed auto
  !
  ip nat pool bbb 218.28.3.134 218.28.3.134 netmask 255.2
  ip nat inside source list 1 pool bbb overload
  ip classless
  ip route 0.0.0.0 0.0.0.0 218.28.3.133
  no ip http server
  !
  access-list 1 permit 200.4.3.0 0.0.0.255
  !
  line con 0
  password zzf7681
  transport input none
  line aux 0
  line vty 0 4
  password zzf7681
  login
  !
  end
  

收藏此篇文章内容到:
Tags:
责任编辑:
  • 请文明参与讨论,禁止漫骂攻击。 用户名:新注册) 密码: 匿名:
    评论总数:0 [ 查看全部 ] 网友评论
    关于我们 - 广告合作 - 网站地图 - 版权说明 - 网站历史 - 世界排名 - 加入收藏 - 设为首页 - 返回顶部