according to the following algorithm:
25
John Day Data Entry Terminal Option
June 27,1977 NIC 40652
RFC731
The macro byte for subcommand i will be i+128 and will represent
the following string for parameterless subcommands:
IAC SB DET <subcommand code> IAC SE
and the following string for subcommands with parameters:
IAC SB DET <subcommand code>
The default setting for this subcommand is that the macros are
not in effect, in other words,
IAC SB DET DET-MACRO WONT IAC SE
IAC SB DET DET-MACRO DONT IAC SE
Negotiation of this subcommand follows the same rules as
negotiations of the Telnet options.
26
John Day Data Entry Terminal Option
June 27,1977 NIC 40652
RFC731
References
1. ADM-1 Interactive Display Terminal Operator's Handbook
Lear-Siegler, Inc. 7410-31.
2. ADM-Interactive Display Terminal Operator's Handbook
Lear-Siegler, Inc. EID, 1974.
3. Burroughs TD 700/800 Reference Manual, Burroughs Corp., 1973
4. Burroughs TD 820 Reference Manual, Burroughs Corp. 1975.
5. CC-40 Communications Station: General Information Manual.
Computer Communication, Inc. Pub. No. MI-1100. 1974.
6. Crocker, David. "Telnet Byte Macro Option," RFC729, 1977.
7. Data Entry Virtual Terminal Protocol for Euronet, DRAFT, 1977.
8. Day, John. "A Minor Pitfall in the Telnet Protocol,"
RFC728, 1977.
9. Hazeltine 2000 Desk Top Display Operating Instructions.
Hazeltine IB-1866A, 1870.
10. How to Use the Consul 980: A Terminal Operator's Guide
and Interface Manual. Applied Digital Data Systems, Inc.
98-3000.
11. How to Use the Consul 520: A Terminal Operator's Guide
and Interface Manual. Applied Digital Data Systems, Inc.
52-3000.
12. Honeywell 7700 Series Visual Information Projection (VIP)
Systems: Preliminary Edition. 1973.
13. An Introduction to the IBM 3270 Information Display System.
IBM GA27-2739-4. 1973.
14. Naffah, N. "Protocole Appareil Virtuel type Ecran"
Reseau Cyclades. TER 536. 1976.
27
John Day Data Entry Terminal Option
June 27,1977 NIC 40652
RFC731
15. Postel, Jon and Crocker, David. "Remote Controlled
Transmission and Echoing Telnet Option", RFC726
NIC 39237, Mar. 1977.
16. Schicker, Peter. "Virtual Terminal Protocol (Proposal 2).
INWG Protocol Note #32., 1976.
17. UNISCOPE Display Terminal : Programmer Reference . Sperry-
Univac UP-7807 Rev. 2, 1975.
18. Universal Terminal System 400: System Description. Sperry-
Univac UP-8357, 1976.
19. Walden, David C. "Telnet Output Line Width Option."
NIC # 20196, 1973, also in ARPANET Protocol Handbook, 1976.
20. Walden, David C. "Telnet Output Page Size" NIC # 20197,
1973, also in ARPANET Protocol Handbook, 1976.