uses this value for negotiation during session activation (SNA
BIND). This parameter is only supported if LZ compression is
used."
::= { appcModeOperEntry 23 }
appcModeOperSyncLvl OBJECT-TYPE
SYNTAX INTEGER {
none(1),
noneConfirm(2),
noneConfirmSyncPoint(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the sync level support for sessions involving this
LU pair and mode name.
none - No sync level is supported.
noneConfirm - None and Confirm level supported.
noneConfirmSyncPoint - None, Confirm and Sync Point is
supported.
"
::= { appcModeOperEntry 24 }
appcModeOperCrypto OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
mandatory(2),
selective(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether session-level cryptography is supported for
sessions involving this LU pair and mode name.
notSupported - Specifies session-level cryptography
is not being used.
mandatory - Specifies session-level cryptography
in being used on all requests
flowing on the sessions.
selective - Specifies session-level cryptography
is required just on selected
requests flowing on the sessions."
::= { appcModeOperEntry 25 }
appcModeOperSyncLvlLastStart OBJECT-TYPE
SYNTAX INTEGER {
none(1),
noneConfirm(2),
noneConfirmSyncPoint(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the sync level support. This value represents the
initial value proposed by the local LU the last time this
capability was negotiated, i.e., when the first session was
bound between the local LU and its partner.
none - No sync level is supported.
noneConfirm - None and Confirm level supported.
noneConfirmSyncPoint - None, Confirm and Sync Point is
supported.
"
::= { appcModeOperEntry 26 }
appcModeOperCryptoLastStart OBJECT-TYPE
SYNTAX INTEGER {
notSupported(1),
mandatory(2),
selective(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether session-level cryptography is supported.
This value represents the initial value proposed by the local
LU the last time this capability was negotiated, i.e., when
the first session was bound between the local LU and its
partner.
notSupported - Specifies session-level cryptography
is not to be used.
mandatory - Specifies session-level cryptography
must be used.
selective - Specifies session-level cryptography
is required just on selected
requests flowing on the sessions."
::= { appcModeOperEntry 27 }
appcModeOperCNOSNeg OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether CNOS negotiation is in process. CNOS
negotiation is used to set or change the various session limits
for a mode."
::= { appcModeOperEntry 28 }
appcModeOperActCwin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of active contention winner sessions."
::= { appcModeOperEntry 29 }
appcModeOperActClos OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of active contention loser sessions."
::= { appcModeOperEntry 30 }
appcModeOperPndCwin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of contention winner sessions that are
pending activation."
::= { appcModeOperEntry 31 }
appcModeOperPndClos OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of contention loser sessions that are
pending activation."
::= { appcModeOperEntry 32 }
appcModeOperPtmCwin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of contention winner sessions that are
pending termination."
::= { appcModeOperEntry 33 }
appcModeOperPtmClos OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of contention loser sessions that are
pending termination."
::= { appcModeOperEntry 34 }
appcModeOperDrainSelf OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the local LU is draining its conversations
for this mode. When a mode session limit is reset (via a CNOS
RESET_SESSION_LIMIT request), the local LU could be set to
process all queued conversations before deactivating all of the
sessions (using the SNA Bracket Initiation Stopped or BIS
protocol). "
::= { appcModeOperEntry 35 }
appcModeOperDrainPart OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the partner LU is draining its conversations
for this mode. When a mode session limit is reset (via a CNOS
RESET_SESSION_LIMIT request), the partner LU could be set to
process all queued conversations before deactivating all of the
sessions (using the SNA Bracket Initiation Stop or BIS
protocol). "
::= { appcModeOperEntry 36 }
-- *********************************************************************
-- APPC TP Admin Table
-- Objects in this table contain default or expected configuration
-- values for remotely attachable transaction programs.
-- *********************************************************************
appcTpAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppcTpAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"APPC Local TP Table"
::= { appcTp 1 }
appcTpAdminEntry OBJECT-TYPE
SYNTAX AppcTpAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of APPC Local TP Information Table."
INDEX { appcTpAdminLocLuName,
appcTpAdminTpName }
::= { appcTpAdminTable 1 }
AppcTpAdminEntry ::= SEQUENCE {
appcTpAdminLocLuName DisplayString,
appcTpAdminTpName DisplayString,
appcTpAdminFileSpec DisplayString,
appcTpAdminStartParm DisplayString,
appcTpAdminTpOperation INTEGER,
appcTpAdminInAttachTimeout Integer32,
appcTpAdminRcvAllocTimeout Integer32,
appcTpAdminSyncLvl INTEGER,
appcTpAdminInstLmt Integer32,
appcTpAdminStatus INTEGER,
appcTpAdminLongRun INTEGER,
appcTpAdminConvType INTEGER,
appcTpAdminConvDuplex INTEGER,
appcTpAdminConvSecReq INTEGER,
appcTpAdminVerPip INTEGER,
appcTpAdminPipSubNum Integer32
}
appcTpAdminLocLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SNA name of the local LU to which this TP definition
applies. This field is from 1 to 17 characters in length,
including a period (.) which separates the NetId from the NAU
name if the NetId is present.
The reserved value '*ALL' indicates that the TP definition
applies to all local LUs, and not just to a single local LU."
::= { appcTpAdminEntry 1 }
appcTpAdminTpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local transaction program name. This name is sent on an
ATTACH remote allocation request.
When the TP name consists entirely of displayable EBCDIC
code points, it is mapped directly to the equivalent ASCII
display string. However, registered TP names always have a
non-displayable EBCDIC code point (value less than or equal to
x'3F') as the first character, so they cannot be directly
mapped to an ASCII display string. These TP names are
converted to a display string that is equivalent to a
hexadecimal display of the EBCDIC code points. For example,
the 2-byte TP name x'06F1' (CNOS) is converted to the 6-byte
ASCII display string '06F1' (including the two single quotes)."
::= { appcTpAdminEntry 2 }
appcTpAdminFileSpec OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local file specification of the transaction program.
May be a zero-length string if not applicable."
::= { appcTpAdminEntry 3 }
appcTpAdminStartParm OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A parameter string passed to the transaction program when it
is started. May be a zero-length string if not supported. "
::= { appcTpAdminEntry 4 }
appcTpAdminTpOperation OBJECT-TYPE
SYNTAX INTEGER {
other(1),
queuedOperatorStarted(2),
queuedOperatorPreloaded(3),
queuedAmStarted(4),
nonqueuedAmStarted(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies how the program will be started.
other - Specifies that the program operation is none of
the methods specified. It may be a
product-specific method.
queuedOperatorStarted - Specifies that one version of the
program will be run at a time. If an incoming
attach arrives and the program has not been started
yet, APPC will issue a message to the operator to
start the specified program. Subsequent attaches
that arrive while the program is active will be
queued.
queuedOperatorPreloaded - Specifies that one version of the
program will be run at a time. If an incoming
attach arrives and the program has not been started
yet, the Attach will be rejected. The APPC attach
manager determines that a TP has started upon
reception of an APPC RECEIVE_ALLOCATE verb, or a
CPI-C Accept_Conversation (CMACCP) or
Specify_Local_TP_Name (CMSLTP) call. No message is
sent to the operator. Subsequent attaches that
arrive while the program is active are queued.
queuedAmStarted - Specifies that one version of the
program will be run at a time and will be started
by the APPC attach manager. Subsequent attaches
that arrive while the program is active will be
queued.
nonqueuedAmStarted - Specifies that multiple copies of the
program will be run at a time and will be started
by the APPC attach manager."
::= { appcTpAdminEntry 5 }
appcTpAdminInAttachTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds incoming attaches
will be queued waiting for an APPC program to issue a
RECEIVE_ALLOCATE verb or for a CPI-C program to issue an
Accept_Conversation (CMACCP) call. This parameter is
meaningful only when appcTpAdminTpOperation has one of the
following values:
queuedOperatorStarted
queuedOperatorPreloaded
queuedAmStarted
A value of zero indicates that there is no timeout."
::= { appcTpAdminEntry 6 }
appcTpAdminRcvAllocTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds an APPC program's
RECEIVE_ALLOCATE verb or a CPI-C program's Accept_Conversation
(CMACCP) call will wait for an incoming attach to arrive.
A value of zero indicates that there is no timeout."
::= { appcTpAdminEntry 7 }
appcTpAdminSyncLvl OBJECT-TYPE
SYNTAX INTEGER {
none(1),
confirm(2),
noneAndConfirm(3),
syncpoint(4),
noneAndSyncpoint(5),
confirmAndSyncpoint(6),
all(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the synchronization level or levels that the
transaction program supports. The levels are defined as
follows:
none - allocation requests indicating a
synchronization level of none are allowed to
start the program.
confirm - allocation requests indicating a
synchronization level of confirm are allowed
to start the program.
syncpoint - allocation requests indicating a
synchronization level of sync point are
allowed to start the program."
::= { appcTpAdminEntry 8 }
appcTpAdminInstLmt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of concurrent instances of this transaction
program that will be supported for a local LU. A value of
zero indicates that there is no limit."
::= { appcTpAdminEntry 9 }
appcTpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
tempDisabled(2),
permDisabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the TP relative to starting execution
when the local LU receives an allocation (ATTACH) request
naming this program.
enabled - the local LU can start the program.
tempDisabled - the local LU cannot start the
program. The local LU rejects the
request with an indication that the
TP is not available but retry is
possible.
permDisabled - the local LU cannot start the
program. The local LU rejects the
request with an indication that the
TP is not available and retry is
not possible."
::= { appcTpAdminEntry 10 }
appcTpAdminLongRun OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this is a long-running transaction program
(i.e., one that stays around even after the conversation goes
away)."
::= { appcTpAdminEntry 11 }
appcTpAdminConvType OBJECT-TYPE
SYNTAX INTEGER {
basic(1),
mapped(2),
basicOrMapped(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the conversation type (basic or mapped) that will be
used by the TP. This value is verified upon receipt of an
incoming attach. The acceptable values are:
basic - Indicates that this transaction program
supports basic conversations.
mapped - Indicates that this transaction program
supports mapped conversations.
basicOrMapped - Indicates that this transaction program
supports both basic and mapped
conversations."
::= { appcTpAdminEntry 12 }
appcTpAdminConvDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2),
halfOrFull(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the conversation duplex type (half or full) that
will be used by the TP. This value is verified upon receipt of
an incoming attach. The acceptable values are:
half - Indicates that this transaction program
supports half duplex conversations.
full - Indicates that this transaction program
supports full duplex conversations.
halfOrFull - Indicates that this transaction program
supports either half or full duplex
conversations."
::= { appcTpAdminEntry 13 }
appcTpAdminConvSecReq OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether conversation-level security information is
required on incoming attaches designating this TP name.
Conversation-level security verification is always performed on
those requests that include security information.
yes - Indicates that conversation-level security
information is required. ATTACHs designating the
transaction program must carry a user_id and
either a password or an already verified
indicator.
no - Indicates that no security information is
required. ATTACHs designating the transaction
program can omit or include security information."
::= { appcTpAdminEntry 14 }
appcTpAdminVerPip OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the number of PIP (Program Initialization
Parameters) subfields should be verified against the number
expected (appcTpAdminPipSubNum)."
::= { appcTpAdminEntry 15 }
appcTpAdminPipSubNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of PIP subfields expected by the TP."
::= { appcTpAdminEntry 16 }
-- *********************************************************************
-- APPC Active Session Table
-- ---------------------------------------------------------------------
-- This table contains information about active APPC sessions.
-- *********************************************************************
appcActSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppcActSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of active APPC sessions. Two entries are present in the
table when both session partners are local."
::= { appcSession 1 }
appcActSessEntry OBJECT-TYPE
SYNTAX AppcActSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of APPC Session Information Table. Indexed by LU pair
and integer-valued session index."
INDEX { appcActSessLocLuName,
appcActSessParLuName,
appcActSessIndex }
::= { appcActSessTable 1 }
AppcActSessEntry ::= SEQUENCE {
appcActSessLocLuName DisplayString,
appcActSessParLuName DisplayString,
appcActSessIndex Integer32,
appcActSessPcidCpName DisplayString,
appcActSessPcid OCTET STRING,
appcActSessPluIndicator INTEGER,
appcActSessModeName DisplayString,
appcActSessCosName DisplayString,
appcActSessTransPriority INTEGER,
appcActSessEnhanceSecSup INTEGER,
appcActSessSendPacingType INTEGER,
appcActSessSendRpc Gauge32,
appcActSessSendNxWndwSize Gauge32,
appcActSessRecvPacingType INTEGER,
appcActSessRecvRpc Gauge32,
appcActSessRecvNxWndwSize Gauge32,
appcActSessRscv OCTET STRING,
appcActSessInUse INTEGER,
appcActSessMaxSndRuSize INTEGER,
appcActSessMaxRcvRuSize INTEGER,
appcActSessSndPacingSize INTEGER,
appcActSessRcvPacingSize INTEGER,
appcActSessOperState INTEGER,
appcActSessUpTime TimeTicks,
appcActSessRtpNceId OCTET STRING,
appcActSessRtpTcid OCTET STRING,
appcActSessLinkIndex InstancePointer
}
appcActSessLocLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the name of the local LU for the session. This
field is from 1 to 17 characters in length, including a period
(.) which separates the NetId from the NAU name if the NetId is
present.
If this object has the same value as appcLluOperName, then the
two entries being indexed apply to the same resource
(specifically, to the same local LU)."
::= { appcActSessEntry 1 }
appcActSessParLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the name of the partner LU for the session. This
field is from 1 to 17 characters in length, including a period
(.) which separates the NetId from the NAU name if the NetId is
present.
If this object has the same value as appcLuPairOperParLuName,
then the two entries being indexed apply to the same resource
(specifically, to the same partner LU)."
::= { appcActSessEntry 2 }
appcActSessIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value identifies the index of the session, which is
unique for this LU pair. It is recommended that an Agent not
reuse the index of a deactivated session for a significant
period of time (e.g., one week)."
::= { appcActSessEntry 3 }
appcActSessPcidCpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0 | 3..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-qualified CP name of the node at which the session
and PCID originated. For APPN and LEN nodes, this is either CP
name of the APPN node at which the origin LU is located or the
CP name of the NN serving the LEN node at which the origin LU
is located. This field is from 3 to 17 characters in length,
including a period (.) which separates the NetId from the NAU
name. A null string indicates that the value is unknown."
::= { appcActSessEntry 4 }
appcActSessPcid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The procedure correlation identifier (PCID) of a session. It
is an 8-octet value assigned by the control point providing
session services for the primary LU. A null string indicates
that the value is unknown."
::= { appcActSessEntry 5 }
appcActSessPluIndicator OBJECT-TYPE
SYNTAX INTEGER {
localLuIsPlu(1),
partnerLuIsPlu(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates which LU is the PLU for this session. For
independent LUs, the PLU (primary LU) is the one that initiated
the session (sent BIND), while the SLU (secondary LU) is the
one that accepted the session initiation (received BIND).
The 'local' LU is the one identified by appcLluOperName.
The 'partner' LU is the one identified by
appcLuPairOperParLuName."
::= { appcActSessEntry 6 }
appcActSessModeName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode name used for this session."
::= { appcActSessEntry 7 }
appcActSessCosName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service (COS) name used for this session.
A null string indicates that the value is unknown."
::= { appcActSessEntry 8 }
appcActSessTransPriority OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
low(2),
medium(3),
high(4),
network(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmission priority of this session.
1 = unknown priority
2 = low priority
3 = medium priority
4 = high priority
5 = network priority
"
::= { appcActSessEntry 9 }
appcActSessEnhanceSecSup OBJECT-TYPE
SYNTAX INTEGER {
none(1),
level1(2),
level2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enhanced security supported. Indicates the level of enhanced
security support:
1 = none
2 = level 1
3 = level 2
"
::= { appcActSessEntry 10 }
appcActSessSendPacingType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
fixed(2),
adaptive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of pacing being used for sending data."
::= { appcActSessEntry 11 }
appcActSessSendRpc OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The send residual pace count. This represents the number of
MUs that can still be sent in the current session window."
::= { appcActSessEntry 12 }
appcActSessSendNxWndwSize OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the next window which will be used to send data."
::= { appcActSessEntry 13 }
appcActSessRecvPacingType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
fixed(2),
adaptive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of pacing being used for receiving data."
::= { appcActSessEntry 14 }
appcActSessRecvRpc OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive residual pace count. This represents the number
of MUs that can still be received in the current session
window."
::= { appcActSessEntry 15 }
appcActSessRecvNxWndwSize OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the next window which will be used to receive
data."
::= { appcActSessEntry 16 }
appcActSessRscv OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route selection control vector (RSCV CV2B) used for this
session. It is present for APPN-level implementations.
LEN-level implementations will return a null string. The
internal format of this vector is described in SNA Formats.
This object contains an uninterpreted copy of the control
vector (including the length and key fields)."
::= { appcActSessEntry 17 }
appcActSessInUse OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the session is currently in use (i.e., in
bracket with a conversation)."
::= { appcActSessEntry 18 }
appcActSessMaxSndRuSize OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum RU size used on this session for sending RUs."
::= { appcActSessEntry 19 }
appcActSessMaxRcvRuSize OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum RU size used on this session for receiving RUs."
::= { appcActSessEntry 20 }
appcActSessSndPacingSize OBJECT-TYPE
SYNTAX INTEGER (1..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the send pacing window on this session."
::= { appcActSessEntry 21 }
appcActSessRcvPacingSize OBJECT-TYPE
SYNTAX INTEGER (1..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the receive pacing window on this session."
::= { appcActSessEntry 22 }
appcActSessOperState OBJECT-TYPE
SYNTAX INTEGER {
unbound (1),
pendingBind (2),
bound (3),
pendingUnbind (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value indicates the current operational state of the
session.
'unbound (1)' - session has been unbound;
in this state it will be removed from the
session table by the Agent.
'pendingBind (2)' - this state has different
meanings for dependent and independent LUs;
for dependent LU - waiting for BIND from
the host, for independent LU - waiting for
BIND response. When a session enters this
state, the corresponding entry in the
session table is created by the Agent.
'bound (3)' - session has been successfully bound.
'pendingUnbind (4)' - session enters this state
when an UNBIND is sent and before the
rsp(UNBIND) is received.
Session deactivation:
If a session is in the operational state
'bound (3)' then setting the value of this
object to 'unbound (1)' will initiate the
session shutdown.
If a session is in the operational state
'pendingBind (2)' then setting the value of this
object to 'unbound (1)' will initiate the session
shutdown.
If a session is in the operational state
'pendingUnbind (4)' for an abnormally long period
of time (e.g., three minutes) then setting the value
of this object to 'unbound (1)' will change the
session operational state to 'unbound (1)'. "
::= { appcActSessEntry 23 }
appcActSessUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of time the session has been active, measured in
hundredths of a second."
::= { appcActSessEntry 24 }
appcActSessRtpNceId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local HPR Network Connection Endpoint of the session."
::= { appcActSessEntry 25 }
appcActSessRtpTcid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local RTP connection TCID of the session."
::= { appcActSessEntry 26 }
appcActSessLinkIndex OBJECT-TYPE
SYNTAX InstancePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value identifies the link over which the session passes.
This value points to the row in the table containing
information on the link instance. (e.g., the sdlcLSAdminTable
of the SNA DLC MIB module). This object may be NULL if the
link is not specified or if a link is not applicable (as for
APPN-level nodes)."
::= { appcActSessEntry 27 }
-- ***************************************************************
-- The following table contains session statistics for APPC sessions.
-- ***************************************************************
appcSessStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppcSessStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains dynamic statistical information relating
to active APPC sessions. The entries in this table cannot be
created by a Management Station. Two entries are present in
the table when both session partners are local. This table is
populated only when the value of appcCntrlOperStat is
'active'."
::= { appcSession 2 }
appcSessStatsEntry OBJECT-TYPE
SYNTAX AppcSessStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains statistics information for an APPC session. Each
entry is created by the Agent. Objects in this table have
read-only access. Each session from appcActSessTable has one
entry in this table."
INDEX { appcSessStatsLocLuName,
appcSessStatsParLuName,
appcSessStatsSessIndex }
::= { appcSessStatsTable 1 }
AppcSessStatsEntry ::= SEQUENCE {
appcSessStatsLocLuName DisplayString,
appcSessStatsParLuName DisplayString,
appcSessStatsSessIndex Integer32,
appcSessStatsSentFmdBytes Counter32,
appcSessStatsSentNonFmdBytes Counter32,
appcSessStatsRcvdFmdBytes Counter32,
appcSessStatsRcvdNonFmdBytes Counter32,
appcSessStatsSentFmdRus Counter32,
appcSessStatsSentNonFmdRus Counter32,
appcSessStatsRcvdFmdRus Counter32,
appcSessStatsRcvdNonFmdRus Counter32,
appcSessStatsCtrUpTime TimeTicks
}
appcSessStatsLocLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the name of the local LU for the session. This
field is from 1 to 17 characters in length, including a period
(.) which separates the NetId from the NAU name if the NetId is
present.
If this object has the same value as appcLluOperName, then the
two entries being indexed apply to the same resource
(specifically, to the same local LU)."
::= { appcSessStatsEntry 1 }
appcSessStatsParLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the name of the partner LU for the session. This
field is from 1 to 17 characters in length, including a period
(.) which separates the NetId from the NAU name if the NetId is
present.
If this object has the same value as appcLuPairOperParLuName,
then the two entries being indexed apply to the same resource
(specifically, to the same partner LU)."
::= { appcSessStatsEntry 2 }
appcSessStatsSessIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value identifies the index of the session, which is
unique for this LU pair. It is recommended that an Agent not
reuse the index of a deactivated session for a significant
period of time (e.g., one week).
If this object has the same value as appcActSessIndex for the
same LU pair, then the two entries being indexed apply to the
same resource (specifically, to the same session)."
::= { appcSessStatsEntry 3 }
appcSessStatsSentFmdBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of function management data (FMD) bytes sent by the
local LU."
::= { appcSessStatsEntry 4 }
appcSessStatsSentNonFmdBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-function management data (non-FMD) bytes
sent by the local LU."
::= { appcSessStatsEntry 5 }
appcSessStatsRcvdFmdBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of function management data (FMD) bytes received by
the local LU."
::= { appcSessStatsEntry 6 }
appcSessStatsRcvdNonFmdBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-function management data (non-FMD) bytes
received by the local LU."
::= { appcSessStatsEntry 7 }
appcSessStatsSentFmdRus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of function management data (FMD) RUs sent by the
local LU."
::= { appcSessStatsEntry 8 }
appcSessStatsSentNonFmdRus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-function management data (non-FMD) RUs sent
by the local LU."
::= { appcSessStatsEntry 9 }
appcSessStatsRcvdFmdRus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of function management data (FMD) RUs received by
the local LU."
::= { appcSessStatsEntry 10 }
appcSessStatsRcvdNonFmdRus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-function management data (non-FMD) RUs
received by the local LU."
::= { appcSessStatsEntry 11 }
appcSessStatsCtrUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of time the counters for this session have been
active, measured in hundredths of a second."
::= { appcSessStatsEntry 12 }
-- *********************************************************************
-- APPC Historical Session Table
-- ---------------------------------------------------------------------
-- This table contains historical information about APPC sessions that
-- terminated abnormally. It is an implementation choice how long to
-- retain information on a given session.
-- *********************************************************************
appcHistSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppcHistSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of historical information about APPC sessions that
terminated abnormally. Two entries may be present in the table
when both session partners are local. It is an implementation
choice how long to retain information about a given session."
::= { appcSession 3 }
appcHistSessEntry OBJECT-TYPE
SYNTAX AppcHistSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of APPC Session History Table. This table is indexed by
an integer which is continuously incremented until it
eventually wraps."
INDEX
{ appcHistSessIndex }
::= { appcHistSessTable 1 }
AppcHistSessEntry ::= SEQUENCE {
appcHistSessIndex INTEGER,
appcHistSessTime DateAndTime,
appcHistSessType INTEGER,
appcHistSessLocLuName DisplayString,
appcHistSessParLuName DisplayString,
appcHistSessModeName DisplayString,
appcHistSessUnbindType OCTET STRING,
appcHistSessSenseData SnaSenseData,
appcHistSessComponentId DisplayString,
appcHistSessDetectModule DisplayString
}
appcHistSessIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table index. The value of the index begins at zero
and is incremented up to a maximum value of 2**31-1
(2,147,483,647) before wrapping."
::= { appcHistSessEntry 1 }
appcHistSessTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the session was either terminated or
failed to be established."
::= { appcHistSessEntry 2 }
appcHistSessType OBJECT-TYPE
SYNTAX INTEGER {
recvNegBindRsp(1),
sendNegBindRsp(2),
sessActRejected(3),
unbindSent(4),
unbindReceived(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of event that caused the entry to be made:
recvNegBindRsp - Received a negative bind response from
the partner LU.
sendNegBindRsp - Sent a negative bind response to the
partner LU.
sessActRejected - Session activation rejected by the
partner LU.
unbindSent - Unbind sent to the partner LU.
unbindReceived - Unbind received from the partner LU.
These event types correspond to the five SNA/MS Alerts
LU62001 through LU62005, documented in the SNA Management
Services Reference."
::= { appcHistSessEntry 3 }
appcHistSessLocLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-qualified local LU name. This field is from 3 to
17 characters in length, including a period (.) which separates
the NetId from the NAU name if the NetId is present."
::= { appcHistSessEntry 4 }
appcHistSessParLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network-qualified partner LU name. This field is from 3
to 17 characters in length, including a period (.) which
separates the NetId from the NAU name if the NetId is present."
::= { appcHistSessEntry 5 }
appcHistSessModeName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode name of the session."
::= { appcHistSessEntry 6 }
appcHistSessUnbindType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of unbind which terminated the session. This
value is consists of one (1) octet; and its meaning
is defined in SNA Formats."
::= { appcHistSessEntry 7 }
appcHistSessSenseData OBJECT-TYPE
SYNTAX SnaSenseData
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sense data associated with the termination of the
session, taken from the negative BIND response or UNBIND
request."
::= { appcHistSessEntry 8 }
appcHistSessComponentId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation-specific name of the component which
detected the problem."
::= { appcHistSessEntry 9 }
appcHistSessDetectModule OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation-specific name of the module which
detected the problem."
::= { appcHistSessEntry 10 }
-- *********************************************************************
-- APPC Session RTP Connection Table
-- ---------------------------------------------------------------------
-- This table contains information on APPC sessions that are being
-- transported on RTP connections by High Performance Routing (HPR).
-- *********************************************************************
appcSessRtpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppcSessRtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating how many APPC sessions terminating in this
node are transported by each RTP connection."
::= { appcSession 4 }
appcSessRtpEntry OBJECT-TYPE
SYNTAX AppcSessRtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of APPC session RTP table."
INDEX { appcSessRtpNceId,
appcSessRtpTcid }
::= { appcSessRtpTable 1 }
AppcSessRtpEntry ::= SEQUENCE {
appcSessRtpNceId OCTET STRING,
appcSessRtpTcid OCTET STRING,
appcSessRtpSessions Gauge32
}
appcSessRtpNceId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local Network Connection Endpoint of the RTP connection."
::= { appcSessRtpEntry 1 }
appcSessRtpTcid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local TCID of the RTP connection."
::= { appcSessRtpEntry 2 }
appcSessRtpSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of APPC sessions terminating in this node
that are using this RTP connection."
::= { appcSessRtpEntry 3 }
-- *********************************************************************
-- APPC Active Conversation Table
-- This table contains information about active APPC conversations.
-- *********************************************************************
appcActiveConvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppcActiveConvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about active APPC Conversations. In this
context 'active' means that a conversation is currently
associated with a particular session. Two entries are present
in the table when both LUs for the session are local."
::= { appcConversation 1 }
appcActiveConvEntry OBJECT-TYPE
SYNTAX AppcActiveConvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry representing one active APPC Conversation."
INDEX { appcActiveConvLocLuName,
appcActiveConvParLuName,
appcActiveConvSessIndex }
::= { appcActiveConvTable 1}
AppcActiveConvEntry ::= SEQUENCE {
appcActiveConvLocLuName DisplayString,
appcActiveConvParLuName DisplayString,
appcActiveConvSessIndex Integer32,
appcActiveConvId OCTET STRING,
appcActiveConvState INTEGER,
appcActiveConvType INTEGER,
appcActiveConvCorrelator OCTET STRING,
appcActiveConvSyncLvl INTEGER,
appcActiveConvSource INTEGER,
appcActiveConvDuplex INTEGER,
appcActiveConvUpTime TimeTicks,
appcActiveConvSendBytes Counter32,
appcActiveConvRcvBytes Counter32,
appcActiveConvUserid DisplayString,
appcActiveConvPcidNauName DisplayString,
appcActiveConvPcid OCTET STRING,
appcActiveConvModeName DisplayString,
appcActiveConvLuwIdName DisplayString,
appcActiveConvLuwIdInstance OCTET STRING,
appcActiveConvLuwIdSequence OCTET STRING,
appcActiveConvTpName DisplayString
}
appcActiveConvLocLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SNA name of the local LU for the conversation. This field
is from 1 to 17 characters in length, including a period (.)
which separates the NetId from the NAU name if the NetId is
present.
If this object has the same value as appcLluOperName,
then the two entries being indexed apply to the same
resource (specifically, to the same local LU)."
::= { appcActiveConvEntry 1 }
appcActiveConvParLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SNA name of the partner LU for the conversation. This
field is from 1 to 17 characters in length, including a period
(.) which separates the NetId from the NAU name if the NetId is
present.
If this object has the same value as appcLuPairOperParLuName,
then the two entries being indexed apply to the same
resource (specifically, to the same partner LU)."
::= { appcActiveConvEntry 2 }
appcActiveConvSessIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of entry in appcActSessTable that is associated with
this conversation. If this object has the same value as
appcActSessIndex for the same LU pair, then the two entries
being indexed apply to the same resource (specifically, to the
same session)."
::= { appcActiveConvEntry 3 }
appcActiveConvId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 4-byte ID of the conversation."
::= { appcActiveConvEntry 4 }
appcActiveConvState OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
send(2),
receive(3),
confirm(4),
confirmSend(5),
confirmDealloc(6),
pendingDeallocate(7),
pendingPost(8),
sendReceive(9),
sendOnly(10),
receiveOnly(11),
deferReceive(12),
deferDeallocate(13),
syncpoint(14),
syncpointSend(15),
syncpointDeallocate(16),
backoutRequired(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state of the conversation at the instant when
the information was retrieved. The values are:
reset
The conversation is reset (i.e., deallocated).
send
The conversation can send data. This value also
is returned if the conversation is in
Send-Pending state.
receive
The conversation can receive data.
confirm
The conversation has received a confirm
indicator. It can issue an [MC_]CONFIRMED or
[MC_]SEND_ERROR verb to change state. It will
continue in Receive state if an [MC_]CONFIRMED
verb is issued.
confirmSend
The conversation is in Confirm state and changes
to Send state when an [MC_]CONFIRMED verb is
issued.
confirmDealloc
The conversation is in Confirm state and becomes
inactive when an [MC_]CONFIRMED verb is issued.
pendingDeallocate
The conversation is in Pending-Deallocate state
while it waits for (MC_)DEALLOCATE TYPE
(sync_level) to complete.
pendingPost
The conversation is in Pending-Post state while
it waits for the [MC_]RECEIVE_AND_POST verb to
complete its receive function.
sendReceive
The full-duplex conversation can send or receive
data.
sendOnly
The full-duplex conversation can send data, but
it does not have permission to receive data,
because the partner TP has already deallocated
its side of the conversation.
receiveOnly
The full-duplex conversation can receive data,
but it does not have permission to send data,
because it has already deallocated its side of
the conversation.
deferReceive
Waiting for a successful SYNCPT verb operation to
go into the receive state.
deferDeallocate
Waiting for a successful SYNCPT verb operation to
go into the reset state.
syncpoint
Need to response to a SYNCPT verb issued. After
successful operation, the next state will be
receive.
syncpointSend
Need to response to a SYNCPT verb issued. After
successful operation, the next state will be
send.
syncpointDeallocate
Need to response to a SYNCPT verb issued. After
successful operation, the next state will be
reset.
backoutRequired
TP must execute a BACKOUT verb to backout the
transaction."
::= { appcActiveConvEntry 5 }
appcActiveConvType OBJECT-TYPE
SYNTAX INTEGER {
basic(1),
mapped(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of conversation. The values are:
basic
Indicates that this conversation supports
basic verbs.
mapped
Indicates that this conversation supports
mapped verbs."
::= { appcActiveConvEntry 6 }
appcActiveConvCorrelator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an 8-byte identifier that the source LU assigns to the
conversation; the source LU is the one that sent the allocation
request. The conversation correlator is included on the
allocation request. The conversation correlator uniquely
identifies a conversation, from among all conversations,
between the local and partner LUs. It may be used, for
example, during problem determination associated with a
conversation. A length of 0 indicates that no conversation
correlator is defined."
::= { appcActiveConvEntry 7 }
appcActiveConvSyncLvl OBJECT-TYPE
SYNTAX INTEGER {
none(1),
confirm(2),
syncpt(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the highest sync level support for the conversation.
The values are:
none
Indicates that no sync-level processing can be
performed on this conversation. The
transaction program does not issue verbs or
recognize any returned parameters
relating to any sync-level function.
confirm
Indicates that confirmation processing can be
performed on this conversation. The
transaction program can issue verbs and
recognize returned parameters relating to
confirmation.
syncpt
Indicates that syncpt and confirmation processing
can be performed on this conversation. The
transaction program can issue verbs and recognize
returned parameters relating to syncpt and
confirmation."
::= { appcActiveConvEntry 8 }
appcActiveConvSource OBJECT-TYPE
SYNTAX INTEGER {
localLu(1),
partnerLu(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the local or partner LU is the source of the
conversation, that is, which LU started the conversation by
sending the allocation request.
localLu
The local LU is the source of the conversation,
and the partner LU is the target of the
conversation.
partnerLu
The partner LU is the source of the