-- Intermediate Session RTP Table
-- *********************************************************************
-- This table contains information on intermediate sessions that are
-- being transported on Rapid Transport Protocol (RTP) connections by
-- High Performance Routing (HPR).
-- *********************************************************************
appnIsRtpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnIsRtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating how many ISR sessions are transported by
each RTP connection."
::= { appnSessIntermediate 3 }
appnIsRtpEntry OBJECT-TYPE
SYNTAX AppnIsRtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of Intermediate Session RTP Table."
INDEX
{ appnIsRtpNceId,
appnIsRtpTcid }
::= { appnIsRtpTable 1 }
AppnIsRtpEntry ::= SEQUENCE {
appnIsRtpNceId OCTET STRING,
appnIsRtpTcid OCTET STRING,
appnIsRtpSessions Gauge32
}
appnIsRtpNceId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local Network Connection Endpoint of the RTP connection."
::= { appnIsRtpEntry 1 }
appnIsRtpTcid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local TCID of the RTP connection."
::= { appnIsRtpEntry 2 }
appnIsRtpSessions OBJECT-TYPE
SYNTAX Gauge32
UNITS "sessions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of intermediate sessions using this RTP
connection."
::= { appnIsRtpEntry 3 }
-- *********************************************************************
appnTraps OBJECT IDENTIFIER ::= { appnMIB 2 }
-- *********************************************************************
alertTrap NOTIFICATION-TYPE
OBJECTS { alertIdNumber, affectedObject }
STATUS current
DESCRIPTION
"This trap carries a 32-bit SNA Management Services (SNA/MS)
Alert ID Number, as specified in SNA/MS Formats."
::= { appnTraps 1 }
alertIdNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A 32-bit SNA Management Services (SNA/MS) Alert ID Number, as
specified in SNA/MS Formats."
::= { appnTraps 2 }
affectedObject OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MIB object associated with the Alert condition, if there
is an object associated with it. If no associated object can
be identified, the value 0.0 is passed in the trap."
::= { appnTraps 3 }
-- *********************************************************************
-- Conformance information
-- *********************************************************************
appnConformance OBJECT IDENTIFIER ::= {appnMIB 3 }
appnCompliances OBJECT IDENTIFIER ::= {appnConformance 1 }
appnGroups OBJECT IDENTIFIER ::= {appnConformance 2 }
-- Compliance statements
appnCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMPv2 entities that
implement the APPN MIB."
MODULE -- this module
-- Unconditionally mandatory groups
MANDATORY-GROUPS {
appnGeneralConfGroup,
appnPortConfGroup,
appnLinkConfGroup,
appnLocalTgConfGroup,
appnDirTableConfGroup
}
-- Conditionally mandatory groups
GROUP appnNnUniqueConfGroup
DESCRIPTION
"The appnNnUniqueConfGroup is mandatory only for
network nodes."
GROUP appnEnUniqueConfGroup
DESCRIPTION
"The appnEnUniqueConfGroup is mandatory only for end
nodes."
GROUP appnVrnConfGroup
DESCRIPTION
"The appnVrnConfGroup is mandatory only for network
nodes and end nodes that implement virtual routing
node support."
GROUP appnNnTopoConfGroup
DESCRIPTION
"The appnNnTopoConfGroup is mandatory only for
network nodes."
GROUP appnLocalEnTopoConfGroup
DESCRIPTION
"The appnLocalEnTopoConfGroup is mandatory only for
network nodes."
GROUP appnLocalDirPerfConfGroup
DESCRIPTION
"The appnLocalDirPerfConfGroup is mandatory only for
APPN network nodes and end nodes."
GROUP appnCosConfGroup
DESCRIPTION
"The appnCosConfGroup is mandatory only for APPN
network nodes and end nodes."
GROUP appnIntSessConfGroup
DESCRIPTION
"The appnIntSessConfGroup is mandatory only for
network nodes."
GROUP appnHprBaseConfGroup
DESCRIPTION
"The appnHprBaseConfGroup is mandatory only for nodes
that implement the HPR base (APPN option set 1400)."
GROUP appnHprRtpConfGroup
DESCRIPTION
"The appnHprRtpConfGroup is mandatory only for nodes
that implement the HPR RTP tower (APPN option set
1401)."
GROUP appnHprCtrlFlowsRtpConfGroup
DESCRIPTION
"The appnHprCtrlFlowsRtpConfGroup is mandatory only
for nodes that implement the HPR Control Flows over
RTP tower (APPN option set 1402)."
GROUP appnHprBfConfGroup
DESCRIPTION
"The appnHprBfConfGroup is mandatory only for nodes
that implement the APPN/HPR boundary function."
GROUP appnTrapConfGroup
DESCRIPTION
"Traps are optional for all nodes."
GROUP appnTrapNotifGroup
DESCRIPTION
"Traps are optional for all nodes."
::= {appnCompliances 1 }
-- Units of conformance
appnGeneralConfGroup OBJECT-GROUP
OBJECTS {
appnNodeCpName,
appnNodeMibVersion,
appnNodeId,
appnNodeType,
appnNodeUpTime,
appnNodeParallelTg,
appnNodeAdaptiveBindPacing,
appnNodeHprSupport,
appnNodeCounterDisconTime
}
STATUS current
DESCRIPTION
"A collection of objects providing the instrumentation of
APPN general information and capabilities."
::= { appnGroups 1 }
appnPortConfGroup OBJECT-GROUP
OBJECTS {
appnPortCommand,
appnPortOperState,
appnPortDlcType,
appnPortPortType,
appnPortSIMRIM,
appnPortLsRole,
appnPortNegotLs,
appnPortDynamicLinkSupport,
appnPortMaxRcvBtuSize,
appnPortMaxIframeWindow,
appnPortDefLsGoodXids,
appnPortDefLsBadXids,
appnPortDynLsGoodXids,
appnPortDynLsBadXids,
appnPortSpecific,
appnPortDlcLocalAddr,
appnPortCounterDisconTime
}
STATUS current
DESCRIPTION
"A collection of objects providing the instrumentation of
APPN port information."
::= { appnGroups 2 }
appnLinkConfGroup OBJECT-GROUP
OBJECTS {
appnLsCommand,
appnLsOperState,
appnLsPortName,
appnLsDlcType,
appnLsDynamic,
appnLsAdjCpName,
appnLsAdjNodeType,
appnLsTgNum,
appnLsLimResource,
appnLsActOnDemand,
appnLsMigration,
appnLsPartnerNodeId,
appnLsCpCpSessionSupport,
appnLsMaxSendBtuSize,
appnLsInXidBytes,
appnLsInMsgBytes,
appnLsInXidFrames,
appnLsInMsgFrames,
appnLsOutXidBytes,
appnLsOutMsgBytes,
appnLsOutXidFrames,
appnLsOutMsgFrames,
appnLsEchoRsps,
appnLsCurrentDelay,
appnLsMaxDelay,
appnLsMinDelay,
appnLsMaxDelayTime,
appnLsGoodXids,
appnLsBadXids,
appnLsSpecific,
appnLsActiveTime,
appnLsCurrentStateTime,
appnLsHprSup,
appnLsLocalAddr,
appnLsRemoteAddr,
appnLsRemoteLsName,
appnLsStatusTime,
appnLsStatusLsName,
appnLsStatusCpName,
appnLsStatusPartnerId,
appnLsStatusTgNum,
appnLsStatusGeneralSense,
appnLsStatusRetry,
appnLsStatusEndSense,
appnLsStatusXidLocalSense,
appnLsStatusXidRemoteSense,
appnLsStatusXidByteInError,
appnLsStatusXidBitInError,
appnLsStatusDlcType,
appnLsStatusLocalAddr,
appnLsStatusRemoteAddr,
appnLsCounterDisconTime
}
STATUS current
DESCRIPTION
"A collection of objects providing the instrumentation of
APPN link information."
::= { appnGroups 3 }
appnLocalTgConfGroup OBJECT-GROUP
OBJECTS {
appnLocalTgDestVirtual,
appnLocalTgDlcData,
appnLocalTgPortName,
appnLocalTgQuiescing,
appnLocalTgOperational,
appnLocalTgCpCpSession,
appnLocalTgEffCap,
appnLocalTgConnCost,
appnLocalTgByteCost,
appnLocalTgSecurity,
appnLocalTgDelay,
appnLocalTgUsr1,
appnLocalTgUsr2,
appnLocalTgUsr3,
appnLocalTgHprSup,
appnLocalTgIntersubnet
}
STATUS current
DESCRIPTION
"A collection of objects providing the instrumentation of
APPN local TG information."
::= { appnGroups 4 }
appnDirTableConfGroup OBJECT-GROUP
OBJECTS {
appnDirNnServerName,
appnDirLuOwnerName,
appnDirLuLocation,
appnDirType
}
STATUS current
DESCRIPTION
"A collection of objects providing the instrumentation of the
APPN directory database."
::= { appnGroups 5 }
appnNnUniqueConfGroup OBJECT-GROUP
OBJECTS {
appnNodeNnCentralDirectory,
appnNodeNnTreeCache,
appnNodeNnRouteAddResist,
appnNodeNnIsr,
appnNodeNnFrsn,
appnNodeNnPeriBorderSup,
appnNodeNnInterchangeSup,
appnNodeNnExteBorderSup,
appnNodeNnSafeStoreFreq,
appnNodeNnRsn,
appnNodeNnCongested,
appnNodeNnIsrDepleted,
appnNodeNnQuiescing,
appnNodeNnGateway
}
STATUS current
DESCRIPTION
"The appnNnUniqueConfGroup is mandatory only for network
nodes."
::= { appnGroups 6 }
appnEnUniqueConfGroup OBJECT-GROUP
OBJECTS {
appnNodeEnModeCosMap,
appnNodeEnNnServer,
appnNodeEnLuSearch
}
STATUS current
DESCRIPTION
"The appnEnUniqueConfGroup is mandatory only for end nodes."
::= { appnGroups 7 }
appnVrnConfGroup OBJECT-GROUP
OBJECTS {
appnVrnPortName
}
STATUS current
DESCRIPTION
"The appnVrnConfGroup is mandatory only for APPN network
nodes and end nodes."
::= { appnGroups 8 }
appnNnTopoConfGroup OBJECT-GROUP
OBJECTS {
appnNnTopoMaxNodes,
appnNnTopoCurNumNodes,
appnNnTopoNodePurges,
appnNnTopoTgPurges,
appnNnTopoTotalTduWars,
appnNnNodeFREntryTimeLeft,
appnNnNodeFRType,
appnNnNodeFRRsn,
appnNnNodeFRRouteAddResist,
appnNnNodeFRCongested,
appnNnNodeFRIsrDepleted,
appnNnNodeFRQuiescing,
appnNnNodeFRGateway,
appnNnNodeFRCentralDirectory,
appnNnNodeFRIsr,
appnNnNodeFRGarbageCollect,
appnNnNodeFRHprSupport,
appnNnNodeFRPeriBorderSup,
appnNnNodeFRInterchangeSup,
appnNnNodeFRExteBorderSup,
appnNnTgFREntryTimeLeft,
appnNnTgFRDestVirtual,
appnNnTgFRDlcData,
appnNnTgFRRsn,
appnNnTgFROperational,
appnNnTgFRQuiescing,
appnNnTgFRCpCpSession,
appnNnTgFREffCap,
appnNnTgFRConnCost,
appnNnTgFRByteCost,
appnNnTgFRSecurity,
appnNnTgFRDelay,
appnNnTgFRUsr1,
appnNnTgFRUsr2,
appnNnTgFRUsr3,
appnNnTgFRGarbageCollect,
appnNnTgFRSubareaNum,
appnNnTgFRHprSup,
appnNnTgFRDestHprTrans,
appnNnTgFRTypeIndicator,
appnNnTgFRIntersubnet
}
STATUS current
DESCRIPTION
"The appnNnTopoConfGroup is mandatory only for network
nodes."
::= { appnGroups 9 }
appnLocalEnTopoConfGroup OBJECT-GROUP
OBJECTS {
appnLocalEnTgEntryTimeLeft,
appnLocalEnTgDestVirtual,
appnLocalEnTgDlcData,
appnLocalEnTgOperational,
appnLocalEnTgCpCpSession,
appnLocalEnTgEffCap,
appnLocalEnTgConnCost,
appnLocalEnTgByteCost,
appnLocalEnTgSecurity,
appnLocalEnTgDelay,
appnLocalEnTgUsr1,
appnLocalEnTgUsr2,
appnLocalEnTgUsr3
}
STATUS current
DESCRIPTION
"The appnLocalEnTopoConfGroup is mandatory only for network
nodes."
::= { appnGroups 10 }
appnLocalDirPerfConfGroup OBJECT-GROUP
OBJECTS {
appnDirMaxCaches,
appnDirCurCaches,
appnDirCurHomeEntries,
appnDirRegEntries,
appnDirInLocates,
appnDirInBcastLocates,
appnDirOutLocates,
appnDirOutBcastLocates,
appnDirNotFoundLocates,
appnDirNotFoundBcastLocates,
appnDirLocateOutstands
}
STATUS current
DESCRIPTION
"The appnLocalDirPerfConfGroup is mandatory only for APPN
network nodes and end nodes."
::= { appnGroups 11 }
appnCosConfGroup OBJECT-GROUP
OBJECTS {
appnCosModeCosName,
appnCosTransPriority,
appnCosNodeRowWgt,
appnCosNodeRowResistMin,
appnCosNodeRowResistMax,
appnCosNodeRowMinCongestAllow,
appnCosNodeRowMaxCongestAllow,
appnCosTgRowWgt,
appnCosTgRowEffCapMin,
appnCosTgRowEffCapMax,
appnCosTgRowConnCostMin,
appnCosTgRowConnCostMax,
appnCosTgRowByteCostMin,
appnCosTgRowByteCostMax,
appnCosTgRowSecurityMin,
appnCosTgRowSecurityMax,
appnCosTgRowDelayMin,
appnCosTgRowDelayMax,
appnCosTgRowUsr1Min,
appnCosTgRowUsr1Max,
appnCosTgRowUsr2Min,
appnCosTgRowUsr2Max,
appnCosTgRowUsr3Min,
appnCosTgRowUsr3Max
}
STATUS current
DESCRIPTION
"The appnCosConfGroup is mandatory only for APPN network
nodes and end nodes."
::= { appnGroups 12 }
appnIntSessConfGroup OBJECT-GROUP
OBJECTS {
appnIsInGlobeCtrAdminStatus,
appnIsInGlobeCtrOperStatus,
appnIsInGlobeCtrStatusTime,
appnIsInGlobeRscv,
appnIsInGlobeRscvTime,
appnIsInGlobeActSess,
appnIsInSessState,
appnIsInPriLuName,
appnIsInSecLuName,
appnIsInModeName,
appnIsInCosName,
appnIsInTransPriority,
appnIsInSessType,
appnIsInSessUpTime,
appnIsInCtrUpTime,
appnIsInP2SFmdPius,
appnIsInS2PFmdPius,
appnIsInP2SNonFmdPius,
appnIsInS2PNonFmdPius,
appnIsInP2SFmdBytes,
appnIsInS2PFmdBytes,
appnIsInP2SNonFmdBytes,
appnIsInS2PNonFmdBytes,
appnIsInPsAdjCpName,
appnIsInPsAdjTgNum,
appnIsInPsSendMaxBtuSize,
appnIsInPsSendPacingType,
appnIsInPsSendRpc,
appnIsInPsSendNxWndwSize,
appnIsInPsRecvPacingType,
appnIsInPsRecvRpc,
appnIsInPsRecvNxWndwSize,
appnIsInSsAdjCpName,
appnIsInSsAdjTgNum,
appnIsInSsSendMaxBtuSize,
appnIsInSsSendPacingType,
appnIsInSsSendRpc,
appnIsInSsSendNxWndwSize,
appnIsInSsRecvPacingType,
appnIsInSsRecvRpc,
appnIsInSsRecvNxWndwSize,
appnIsInRouteInfo
}
STATUS current
DESCRIPTION
"The appnIntSessConfGroup is mandatory only for network
nodes."
::= { appnGroups 13 }
appnHprBaseConfGroup OBJECT-GROUP
OBJECTS {
appnNodeHprIntRteSetups,
appnNodeHprIntRteRejects,
appnLsErrRecoSup,
appnLsForAnrLabel,
appnLsRevAnrLabel
}
STATUS current
DESCRIPTION
"The appnHprBaseConfGroup is mandatory only for nodes that
implement the HPR base (APPN option set 1400)."
::= { appnGroups 14 }
appnHprRtpConfGroup OBJECT-GROUP
OBJECTS {
appnNodeMaxSessPerRtpConn,
appnNodeHprOrgRteSetups,
appnNodeHprOrgRteRejects,
appnNodeHprEndRteSetups,
appnNodeHprEndRteRejects,
appnLsBfNceId
}
STATUS current
DESCRIPTION
"The appnHprRtpConfGroup is mandatory only for nodes that
implement the HPR RTP tower (APPN option set 1401)."
::= { appnGroups 15 }
appnHprCtrlFlowsRtpConfGroup OBJECT-GROUP
OBJECTS {
appnLsCpCpNceId,
appnLsRouteNceId
}
STATUS current
DESCRIPTION
"The appnHprCtrlFlowsRtpConfGroup is mandatory only for nodes
that implement the HPR Control Flows over RTP tower (APPN
option set 1402)."
::= { appnGroups 16 }
appnHprBfConfGroup OBJECT-GROUP
OBJECTS {
appnIsInGlobeHprBfActSess,
appnIsInRtpNceId,
appnIsInRtpTcid,
appnIsRtpSessions
}
STATUS current
DESCRIPTION
"The appnHprBfConfGroup is mandatory only for nodes that
implement the APPN/HPR boundary function."
::= { appnGroups 17 }
appnTrapConfGroup OBJECT-GROUP
OBJECTS {
alertIdNumber,
affectedObject
}
STATUS current
DESCRIPTION
"The appnTrapConfGroup is optional for all APPN nodes. Nodes
implementing this group shall also implement the
appnTrapNotifGroup."
::= { appnGroups 18 }
appnTrapNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
alertTrap
}
STATUS current
DESCRIPTION
"The appnTrapNotifGroup is optional for all APPN nodes.
Nodes implementing this group shall also implement the
appnTrapConfGroup."
::= { appnGroups 19 }
END
5. Acknowledgments
This MIB module is the product of the IETF SNA NAU MIB WG and the AIW
APPN/HPR MIBs SIG. Thanks to Wayne Clark, Cisco Systems; Jim Cobban,
Nortel; Rich Daugherty, IBM Corporation; Mark Regan, Cisco Systems;
and Leo Temoshenko, IBM Corporation, for their contributions and
review.
6. References
[1] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
Waldbusser, "Structure of Management Information for version 2
of the Simple Network Management Protocol (SNMPv2)", RFC1902,
January 1996.
[2] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
Waldbusser, "Textual Conventions for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC1903, January 1996.
[3] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
Waldbusser, "Conformance Statements for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC1904, January 1996.
[4] IBM, Systems Network Architecture Technical Overview, GC30-3073.
[5] IBM, Systems Network Architecture APPN Architecture Reference,
SC30-3422
[6] IBM, Systems Network Architecture Formats, SC30-3346.
[7] Allen, M., Clouston, B., Kielczewski, Z., Kwan, W., and B.
Moore, "Definition of Managed Objects for APPC", RFC2051, Wall
Data Inc., Cisco Systems, Jupiter Technology Inc., IBM
Corporation, December 1995.
[8] Kielczewski, Z., Kostick D., and K. Shih, "Definition of Managed
Objects for SNA NAUs using SMIv2", RFC1666, Eicon Technology
Corporation, Bell Communications Research, Novell, August 1994.
[9] Clouston, B., and B. Moore, "Definitions of Managed Objects for
DLUR", November 1996.
[10] Clouston, B., and B. Moore, "Definitions of Managed Objects for
HPR", November 1996.
[11] SNA DLC Services MIB Working Group, Hilgeman, J., Nix, S.,
Bartky, A., and W. Clark, "Definitions of Managed Objects for
SNA Data Link Control (SDLC) using SMIv2", RFC1747, January
1995. URL: ftp://ds.internic.net/rfc/rfc1747.txt
[12] SNA DLC Services MIB Working Group, Berl, S., Nix, S., and W.
Clark, "Definitions of Managed Objects for SNA Data Link
Control: LLC", May 1995.
[13] Chen, D., Gayek, P., and S. Nix, "Definitions of Managed Objects
for Data Link Switching using SNMPv2", RFC2024, October 1995.
[14] IBM, Systems Network Architecture Management Services Formats,
GC31-8302.
7. Security Considerations
In most cases, MIBs are not themselves security risks; if SNMP
security is operating as intended, the use of a MIB to view
information about a system, or to change some parameter at the
system, is a tool, not a threat.
None of the read-only objects in the APPN MIB reports a password,
user data, or anything else that is particularly sensitive. Some
enterprises view their network configuration itself, as well as
information about network usage and performance, as corporate assets;
such enterprises may wish to restrict SNMP access to most of the
objects in the MIB.
Four of the read-write objects in the MIB can affect network
operations; it is recommended that SNMP access to these objects be
restricted. The four objects are:
o appnNodeNnSafeStoreFreq: Setting this object to 0, or to a very
large value, effectively turns off safe storing of topology
data.
o appnPortCommand, appnLsCommand: These two objects allow an APPN
port or link station to be activated, deactivated, or recycled
via an SNMP operation. The latter two operations may disrupt
current users of the network.
o appnIsInSessState: Setting this object to 'inactive' causes an
active SNA session to be deactivated.
Other read-write objects control the gathering of network
management data; controlling access to these objects is less
critical.
8. Authors' Addresses
Bob Clouston
Cisco Systems
7025 Kit Creek Road
P.O. Box 14987
Research Triangle Park, NC 27709, USA
Tel: 1 919 472 2333
E-mail: clouston@cisco.com
Bob Moore
IBM Corporation
800 Park Offices Drive
CNMA/664
P.O. Box 12195
Research Triangle Park, NC 27709, USA
Tel: 1 919 254 4436
E-mail: remoore@ralvm6.vnet.ibm.com