SYNTAX RsvpResvFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the state information
displayed upstream in an RESV message concern-
ing a single sender."
INDEX { rsvpSessionNumber, rsvpResvFwdNumber }
::= { rsvpResvFwdTable 1 }
RsvpResvFwdEntry ::=
SEQUENCE {
rsvpResvFwdNumber SessionNumber,
rsvpResvFwdType SessionType,
rsvpResvFwdDestAddr OCTET STRING,
rsvpResvFwdSenderAddr OCTET STRING,
rsvpResvFwdDestAddrLength INTEGER,
rsvpResvFwdSenderAddrLength INTEGER,
rsvpResvFwdProtocol Protocol,
rsvpResvFwdDestPort Port,
rsvpResvFwdPort Port,
rsvpResvFwdHopAddr OCTET STRING,
rsvpResvFwdHopLih Integer32,
rsvpResvFwdInterface InterfaceIndex,
rsvpResvFwdService QosService,
rsvpResvFwdTSpecRate BitRate,
rsvpResvFwdTSpecPeakRate BitRate,
rsvpResvFwdTSpecBurst BurstSize,
rsvpResvFwdTSpecMinTU MessageSize,
rsvpResvFwdTSpecMaxTU MessageSize,
rsvpResvFwdRSpecRate BitRate,
rsvpResvFwdRSpecSlack Integer32,
rsvpResvFwdInterval RefreshInterval,
rsvpResvFwdScope OCTET STRING,
rsvpResvFwdShared TruthValue,
rsvpResvFwdExplicit TruthValue,
rsvpResvFwdRSVPHop TruthValue,
rsvpResvFwdLastChange TimeStamp,
rsvpResvFwdPolicy OCTET STRING,
rsvpResvFwdStatus RowStatus,
rsvpResvFwdTTL INTEGER,
rsvpResvFwdFlowId INTEGER
}
rsvpResvFwdNumber OBJECT-TYPE
SYNTAX SessionNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this reservation request. This
is for SNMP Indexing purposes only and has no
relation to any protocol value."
::= { rsvpResvFwdEntry 1 }
rsvpResvFwdType OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow
information, etc)."
::= { rsvpResvFwdEntry 2 }
rsvpResvFwdDestAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address used by all senders in
this session. This object may not be changed
when the value of the RowStatus object is 'ac-
tive'."
::= { rsvpResvFwdEntry 3 }
rsvpResvFwdSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the sender selected by
this reservation. The value of all zeroes in-
dicates 'all senders'. This object may not be
changed when the value of the RowStatus object
is 'active'."
::= { rsvpResvFwdEntry 4 }
rsvpResvFwdDestAddrLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits. This
object may not be changed when the value of the
RowStatus object is 'active'."
::= { rsvpResvFwdEntry 5 }
rsvpResvFwdSenderAddrLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits. This
object may not be changed when the value of the
RowStatus object is 'active'."
::= { rsvpResvFwdEntry 6 }
rsvpResvFwdProtocol OBJECT-TYPE
SYNTAX Protocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Protocol used by a session. for secure
sessions, this indicates IP Security. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'."
::= { rsvpResvFwdEntry 7 }
rsvpResvFwdDestPort OBJECT-TYPE
SYNTAX Port
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP or TCP port number used as a destina-
tion port for all senders in this session. If
the IP protocol in use, specified by
rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'."
::= { rsvpResvFwdEntry 8 }
rsvpResvFwdPort OBJECT-TYPE
SYNTAX Port
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP or TCP port number used as a source
port for this sender in this session. If the
IP protocol in use, specified by
rsvpResvFwdProtocol is 50 (ESP) or 51 (AH),
this represents a generalized port identifier
(GPI). A value of zero indicates that the IP
protocol in use does not have ports. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'."
::= { rsvpResvFwdEntry 9 }
rsvpResvFwdHopAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the (previous) RSVP that will
receive this message."
::= { rsvpResvFwdEntry 10 }
rsvpResvFwdHopLih OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Logical Interface Handle sent to the (pre-
vious) RSVP that will receive this message."
::= { rsvpResvFwdEntry 11 }
rsvpResvFwdInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the interface on which
this RESV message was most recently sent."
::= { rsvpResvFwdEntry 12 }
rsvpResvFwdService OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS Service classification requested."
::= { rsvpResvFwdEntry 13 }
rsvpResvFwdTSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as rsvpResvFwdTSpec-
PeakRate (if supported by the service model);
however, averaged across two or more burst in-
tervals, the rate should not exceed
rsvpResvFwdTSpecRate.
Note that this is a prediction, often based on
the general capability of a type of codec or
particular encoding; the measured average rate
may be significantly lower."
::= { rsvpResvFwdEntry 14 }
rsvpResvFwdTSpecPeakRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Peak Bit Rate of the sender's data stream
Traffic arrival is not expected to exceed this
rate at any time, apart from the effects of
jitter in the network. If not specified in the
TSpec, this returns zero or noSuchValue."
::= { rsvpResvFwdEntry 15 }
rsvpResvFwdTSpecBurst OBJECT-TYPE
SYNTAX BurstSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest burst expected from
the sender at a time.
If this is less than the sender's advertised
burst size, the receiver is asking the network
to provide flow pacing beyond what would be
provided under normal circumstances. Such pac-
ing is at the network's option."
::= { rsvpResvFwdEntry 16 }
rsvpResvFwdTSpecMinTU OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size."
::= { rsvpResvFwdEntry 17 }
rsvpResvFwdTSpecMaxTU OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum message size for this flow. The
admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU."
::= { rsvpResvFwdEntry 18 }
rsvpResvFwdRSpecRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bytes per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by rsvpResvService, this is the
clearing rate that is being requested. Other-
wise, it is zero, or the agent may return
noSuchValue."
::= { rsvpResvFwdEntry 19 }
rsvpResvFwdRSpecSlack OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the requested service is Guaranteed, as
specified by rsvpResvService, this is the delay
slack. Otherwise, it is zero, or the agent may
return noSuchValue."
::= { rsvpResvFwdEntry 20 }
rsvpResvFwdInterval OBJECT-TYPE
SYNTAX RefreshInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between refresh messages adver-
tised to the Previous Hop."
::= { rsvpResvFwdEntry 21 }
rsvpResvFwdScope OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..65536))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contents of the scope object, displayed as
an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length."
::= { rsvpResvFwdEntry 22 }
rsvpResvFwdShared OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, a reservation shared among senders is
requested. If FALSE, a reservation specific to
this sender is requested."
::= { rsvpResvFwdEntry 23 }
rsvpResvFwdExplicit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, individual senders are listed using
Filter Specifications. If FALSE, all senders
are implicitly selected. The Scope Object will
contain a list of senders that need to receive
this reservation request for the purpose of
routing the RESV message."
::= { rsvpResvFwdEntry 24 }
rsvpResvFwdRSVPHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If TRUE, the node believes that the next IP
hop is an RSVP hop. If FALSE, the node be-
lieves that the next IP hop may not be an RSVP
hop."
::= { rsvpResvFwdEntry 25 }
rsvpResvFwdLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the last change in this request;
This is either the first time it was sent or
the time of the most recent change in parame-
ters."
::= { rsvpResvFwdEntry 26 }
rsvpResvFwdPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..65536))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contents of the policy object, displayed
as an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length."
::= { rsvpResvFwdEntry 27 }
rsvpResvFwdStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"'active' for all active RESV messages. This
object may be used to delete RESV information."
::= { rsvpResvFwdEntry 28 }
rsvpResvFwdTTL OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTL value in the RSVP header that was last
received."
::= { rsvpResvFwdEntry 29 }
rsvpResvFwdFlowId OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flow ID that this receiver is using, if
this is an IPv6 session."
::= { rsvpResvFwdEntry 30 }
-- The RSVP Interface Attributes Database contains the
-- RSVP-specific information for an interface. Information
-- that is shared with other reservation procedures such
-- as ST-II is in the Integrated Interface Attributes
-- Database.
rsvpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RSVP-specific attributes of the system's
interfaces."
::= { rsvpObjects 6 }
rsvpIfEntry OBJECT-TYPE
SYNTAX RsvpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RSVP-specific attributes of the a given
interface."
INDEX { ifIndex }
::= { rsvpIfTable 1 }
RsvpIfEntry ::=
SEQUENCE {
rsvpIfUdpNbrs Gauge32,
rsvpIfIpNbrs Gauge32,
rsvpIfNbrs Gauge32,
rsvpIfEnabled TruthValue,
rsvpIfUdpRequired TruthValue,
rsvpIfRefreshBlockadeMultiple INTEGER,
rsvpIfRefreshMultiple INTEGER,
rsvpIfTTL INTEGER,
rsvpIfRefreshInterval TimeInterval,
rsvpIfRouteDelay TimeInterval,
rsvpIfStatus RowStatus
}
rsvpIfUdpNbrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbors perceived to be using
only the RSVP UDP Encapsulation."
::= { rsvpIfEntry 1 }
rsvpIfIpNbrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbors perceived to be using
only the RSVP IP Encapsulation."
::= { rsvpIfEntry 2 }
rsvpIfNbrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbors currently perceived;
this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs
by the number of neighbors using both encapsu-
lations."
::= { rsvpIfEntry 3 }
rsvpIfRefreshBlockadeMultiple OBJECT-TYPE
SYNTAX INTEGER (1..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the RSVP value 'Kb', Which is the
minimum number of refresh intervals that
blockade state will last once entered."
DEFVAL { 4 }
::= { rsvpIfEntry 4 }
rsvpIfRefreshMultiple OBJECT-TYPE
SYNTAX INTEGER (1..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged out."
DEFVAL { 3 }
::= { rsvpIfEntry 5 }
rsvpIfTTL OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of SEND_TTL used on this interface
for messages this node originates. If set to
zero, the node determines the TTL via other
means."
DEFVAL { 0 } -- which is to say, no override
::= { rsvpIfEntry 6 }
rsvpIfRefreshInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the RSVP value 'R', which is the
minimum period between refresh transmissions of
a given PATH or RESV message on an interface."
DEFVAL { 3000 } -- 30 seconds
::= { rsvpIfEntry 7 }
rsvpIfRouteDelay OBJECT-TYPE
SYNTAX TimeInterval
UNITS "hundredths of a second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The approximate period from the time a route
is changed to the time a resulting message ap-
pears on the interface."
DEFVAL { 200 } -- 2 seconds
::= { rsvpIfEntry 8 }
rsvpIfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If TRUE, RSVP is enabled on this Interface.
If FALSE, RSVP is not enabled on this inter-
face."
::= { rsvpIfEntry 9 }
rsvpIfUdpRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If TRUE, manual configuration forces the use
of UDP encapsulation on the interface. If
FALSE, UDP encapsulation is only used if rsvpI-
fUdpNbrs is not zero."
::= { rsvpIfEntry 10 }
rsvpIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"'active' on interfaces that are configured for
RSVP."
::= { rsvpIfEntry 11 }
-- The RSVP Neighbor Database lists the neighbors the RSVP
-- process currently is receiving messages from.
rsvpNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the Neighbors of an
RSVP system."
::= { rsvpObjects 7 }
rsvpNbrEntry OBJECT-TYPE
SYNTAX RsvpNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing a single RSVP Neigh-
bor."
INDEX { ifIndex, rsvpNbrAddress }
::= { rsvpNbrTable 1 }
RsvpNbrEntry ::=
SEQUENCE {
rsvpNbrAddress OCTET STRING,
rsvpNbrProtocol RsvpEncapsulation,
rsvpNbrStatus RowStatus
}
rsvpNbrAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP4 or IP6 Address used by this neighbor.
This object may not be changed when the value
of the RowStatus object is 'active'."
::= { rsvpNbrEntry 1 }
rsvpNbrProtocol OBJECT-TYPE
SYNTAX RsvpEncapsulation
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The encapsulation being used by this neigh-
bor."
::= { rsvpNbrEntry 2 }
rsvpNbrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"'active' for all neighbors. This object may
be used to configure neighbors. In the pres-
ence of configured neighbors, the implementa-
tion may (but is not required to) limit the set
of valid neighbors to those configured."
::= { rsvpNbrEntry 3 }
--
-- Notifications used to signal events
--
rsvpNotifications OBJECT IDENTIFIER
::= { rsvpNotificationsPrefix 0 }
newFlow NOTIFICATION-TYPE
OBJECTS {
intSrvFlowStatus, rsvpSessionDestAddr,
rsvpResvFwdStatus, rsvpResvStatus, rsvpSenderStatus
}
STATUS current
DESCRIPTION
"The newFlow trap indicates that the originat-
ing system has installed a new flow in its
classifier, or (when reservation authorization
is in view) is prepared to install such a flow
in the classifier and is requesting authoriza-
tion. The objects included with the Notifica-
tion may be used to read further information
using the Integrated Services and RSVP MIBs.
Authorization or non-authorization may be
enacted by a write to the variable intSrvFlowS-
tatus."
::= { rsvpNotifications 1 }
lostFlow NOTIFICATION-TYPE
OBJECTS {
intSrvFlowStatus, rsvpSessionDestAddr,
rsvpResvFwdStatus, rsvpResvStatus, rsvpSenderStatus
}
STATUS current
DESCRIPTION
"The lostFlow trap indicates that the originat-
ing system has removed a flow from its classif-
ier."
::= { rsvpNotifications 2 }
-- conformance information
rsvpGroups OBJECT IDENTIFIER ::= { rsvpConformance 1 }
rsvpCompliances OBJECT IDENTIFIER ::= { rsvpConformance 2 }
-- compliance statements
rsvpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement. Note that the im-
plementation of this module requires implemen-
tation of the Integrated Services MIB as well."
MODULE -- this module
MANDATORY-GROUPS {
rsvpSessionGroup, rsvpSenderGroup, rsvpResvGroup,
rsvpIfGroup, rsvpNbrGroup
}
GROUP rsvpResvFwdGroup
DESCRIPTION
"The Reservation Requests table is appropriate
in implementations that store upstream reserva-
tion messages, but not appropriate in implemen-
tations which calculate them on each transmis-
sion."
GROUP rsvpNotificationGroup
DESCRIPTION
"The notifications in this module may be used to
advise a network management station of changes in
flow status, and are required when this use is in
view."
OBJECT rsvpSessionRequests
MIN-ACCESS not-accessible
DESCRIPTION
"This object is optional."
OBJECT rsvpSenderType
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderDestAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderDestAddrLength
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAddrLength
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderProtocol
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderDestPort
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderPort
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderHopAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderHopLih
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderInterface
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderTSpecRate
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderTSpecPeakRate
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderTSpecBurst
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderTSpecMinTU
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderTSpecMaxTU
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderInterval
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderRSVPHop
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderPolicy
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAdspecBreak
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAdspecHopCount
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAdspecPathBw
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAdspecMinLatency
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAdspecMtu
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderAdspecGuaranteedSvc
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedBreak
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedCtot
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedDtot
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedCsum
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedDsum
MIN-ACCESS read-only
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedHopCount
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedPathBw
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedMinLatency
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecGuaranteedMtu
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Guaranteed Service."
OBJECT rsvpSenderAdspecCtrlLoadSvc
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Controlled Load."
OBJECT rsvpSenderAdspecCtrlLoadBreak
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Controlled Load."
OBJECT rsvpSenderAdspecCtrlLoadHopCount
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Controlled Load."
OBJECT rsvpSenderAdspecCtrlLoadPathBw
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Controlled Load."
OBJECT rsvpSenderAdspecCtrlLoadMinLatency
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Controlled Load."
OBJECT rsvpSenderAdspecCtrlLoadMtu
MIN-ACCESS not-accessible
DESCRIPTION
"This may be not-accessible if the system does not
support Controlled Load."
OBJECT rsvpSenderStatus
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpSenderFlowId
MIN-ACCESS not-accessible
DESCRIPTION
"This object is needed only in a system that imple-
ments IPv6."
OBJECT rsvpResvType
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvDestAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvSenderAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvDestAddrLength
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvSenderAddrLength
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvProtocol
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvDestPort
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvPort
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvHopAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvHopLih
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvInterface
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvService
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvTSpecRate
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvTSpecPeakRate
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvTSpecBurst
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvTSpecMinTU
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvTSpecMaxTU
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvRSpecRate
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvRSpecSlack
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvInterval
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvScope
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvShared
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvExplicit
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvRSVPHop
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvPolicy
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvStatus
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvFlowId
MIN-ACCESS not-accessible
DESCRIPTION
"This object is needed only in a system that imple-
ments IPv6."
OBJECT rsvpResvFwdStatus
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT rsvpResvFwdFlowId
MIN-ACCESS not-accessible
DESCRIPTION
"This object is needed only in a system that imple-
ments IPv6."
::= { rsvpCompliances 1 }
rsvpSessionGroup OBJECT-GROUP
OBJECTS {
rsvpSessionType, rsvpSessionDestAddr,
rsvpSessionDestAddrLength, rsvpSessionProtocol,
rsvpSessionPort, rsvpSessionSenders, rsvpSessionReceivers,
rsvpSessionRequests
}
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { rsvpGroups 1 }
rsvpSenderGroup OBJECT-GROUP
OBJECTS {
rsvpSenderType, rsvpSenderDestAddr, rsvpSenderAddr,
rsvpSenderDestAddrLength, rsvpSenderAddrLength,
rsvpSenderProtocol, rsvpSenderDestPort, rsvpSenderPort,
rsvpSenderHopAddr, rsvpSenderHopLih, rsvpSenderInterface,
rsvpSenderTSpecRate, rsvpSenderTSpecPeakRate,
rsvpSenderTSpecBurst, rsvpSenderTSpecMinTU,
rsvpSenderTSpecMaxTU, rsvpSenderInterval,
rsvpSenderLastChange, rsvpSenderStatus,
rsvpSenderRSVPHop, rsvpSenderPolicy,
rsvpSenderAdspecBreak, rsvpSenderAdspecHopCount,
rsvpSenderAdspecPathBw, rsvpSenderAdspecMinLatency,
rsvpSenderAdspecMtu, rsvpSenderAdspecGuaranteedSvc,
rsvpSenderAdspecGuaranteedBreak,
rsvpSenderAdspecGuaranteedCtot,
rsvpSenderAdspecGuaranteedDtot,
rsvpSenderAdspecGuaranteedCsum,
rsvpSenderAdspecGuaranteedDsum,
rsvpSenderAdspecGuaranteedHopCount,
rsvpSenderAdspecGuaranteedPathBw,
rsvpSenderAdspecGuaranteedMinLatency,
rsvpSenderAdspecGuaranteedMtu, rsvpSenderAdspecCtrlLoadSvc,
rsvpSenderAdspecCtrlLoadBreak,
rsvpSenderAdspecCtrlLoadHopCount,
rsvpSenderAdspecCtrlLoadPathBw,
rsvpSenderAdspecCtrlLoadMinLatency,
rsvpSenderAdspecCtrlLoadMtu, rsvpSenderNewIndex
}
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { rsvpGroups 2 }
rsvpResvGroup OBJECT-GROUP
OBJECTS {
rsvpResvType, rsvpResvDestAddr, rsvpResvSenderAddr,
rsvpResvDestAddrLength, rsvpResvSenderAddrLength,
rsvpResvProtocol, rsvpResvDestPort, rsvpResvPort,
rsvpResvHopAddr, rsvpResvHopLih, rsvpResvInterface,
rsvpResvService, rsvpResvTSpecRate, rsvpResvTSpecBurst,
rsvpResvTSpecPeakRate, rsvpResvTSpecMinTU,
rsvpResvTSpecMaxTU, rsvpResvRSpecRate,
rsvpResvRSpecSlack, rsvpResvInterval,
rsvpResvScope, rsvpResvShared, rsvpResvExplicit,
rsvpResvRSVPHop, rsvpResvLastChange, rsvpResvPolicy,
rsvpResvStatus, rsvpResvNewIndex
}
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { rsvpGroups 3 }
rsvpResvFwdGroup OBJECT-GROUP
OBJECTS {
rsvpResvFwdType, rsvpResvFwdDestAddr, rsvpResvFwdSenderAddr,
rsvpResvFwdDestAddrLength, rsvpResvFwdSenderAddrLength,
rsvpResvFwdProtocol, rsvpResvFwdDestPort, rsvpResvFwdPort,
rsvpResvFwdHopAddr, rsvpResvFwdHopLih, rsvpResvFwdInterface,
rsvpResvFwdNewIndex, rsvpResvFwdService,
rsvpResvFwdTSpecPeakRate, rsvpResvFwdTSpecMinTU,
rsvpResvFwdTSpecMaxTU, rsvpResvFwdTSpecRate,
rsvpResvFwdTSpecBurst, rsvpResvFwdRSpecRate,
rsvpResvFwdRSpecSlack, rsvpResvFwdInterval,
rsvpResvFwdScope, rsvpResvFwdShared, rsvpResvFwdExplicit,
rsvpResvFwdRSVPHop, rsvpResvFwdLastChange,
rsvpResvFwdPolicy, rsvpResvFwdStatus
}
STATUS current
DESCRIPTION
"These objects are optional, used for some RSVP
Systems."
::= { rsvpGroups 4 }
rsvpIfGroup OBJECT-GROUP
OBJECTS {
rsvpIfUdpNbrs, rsvpIfIpNbrs, rsvpIfNbrs, rsvpIfEnabled,
rsvpIfUdpRequired, rsvpIfRefreshBlockadeMultiple,
rsvpIfRefreshMultiple, rsvpIfRefreshInterval, rsvpIfTTL,
rsvpIfRouteDelay, rsvpIfStatus
}
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { rsvpGroups 6 }
rsvpNbrGroup OBJECT-GROUP
OBJECTS {
rsvpNbrProtocol, rsvpNbrStatus
}
STATUS current
DESCRIPTION
"These objects are required for RSVP Systems."
::= { rsvpGroups 7 }
rsvpNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { newFlow, lostFlow }
STATUS current
DESCRIPTION
"This notification is required for Systems sup-
porting the RSVP Policy Module using an SNMP
interface to the Policy Manager."
::= { rsvpGroups 8 }
END
4. Security Considerations
The use of an SNMP SET results in an RSVP or Integrated Services
reservation under rules that are different compared to if the
reservation was negotiated using RSVP. However, no other security
considerations exist other than those imposed by SNMP itself.
5. Authors' Addresses
Fred Baker
Postal: Cisco Systems
519 Lado Drive
Santa Barbara, California 93111
Phone: +1 805 681 0115
EMail: fred@cisco.com
John Krawczyk
Postal: ArrowPoint Communications
235 Littleton Road
Westford, Massachusetts 01886
Phone: +1 508 692 5875
EMail: jjk@tiac.net
Arun Sastry
Postal: Cisco Systems
210 W. Tasman Drive
San Jose, California 95134
Phone: +1 408 526 7685
EMail: arun@cisco.com
6. Acknowledgements
This document was produced by the RSVP Working Group.
7. References
[1] Rose, M., Editor, "Management Information Base for
Network Management of TCP/IP-based internets", STD 17,
RFC1213, May 1990.
[2] Information processing systems - Open Systems
Interconnection - Specification of Abstract Syntax
Notation One (ASN.1), International Organization for
Standardization. International Standard 8824, (December,
1987).
[3] Information processing systems - Open Systems
Interconnection - Specification of Basic Encoding Rules
for Abstract Notation One (ASN.1), International
Organization for Standardization. International Standard
8825, (December, 1987).