::= { dot3ChipSetTI 5 }
dot3ChipSetToshiba OBJECT IDENTIFIER ::= { dot3ChipSets 8 }
dot3ChipSetToshibaTC35815F OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Toshiba
TC35815F PCI-Based 100/10Mbps Ethernet
Controller."
::= { dot3ChipSetToshiba 1 }
dot3ChipSetLucent OBJECT IDENTIFIER ::= { dot3ChipSets 9 }
dot3ChipSetLucentATT1MX10 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Lucent
Technologies ATT1MX10 (Spinnaker) Quad MAC and
Tranceiver for Ethernet Frame Switching."
::= { dot3ChipSetLucent 1 }
dot3ChipSetLucentLUC3M08 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Lucent
Technologies LUC3M08 Eight Ethernet MACs for
10/100 Mbits/s Frame Switching."
::= { dot3ChipSetLucent 2 }
dot3ChipSetGalileo OBJECT IDENTIFIER ::= { dot3ChipSets 10 }
dot3ChipSetGalileoGT48001 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Galileo
Technology GT-48001A Switched Ethernet
Controller."
::= { dot3ChipSetGalileo 1 }
dot3ChipSetGalileoGT48002 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Galileo
Technology GT-48002A Switched Fast Ethernet
Controller."
::= { dot3ChipSetGalileo 2 }
dot3ChipSetGalileoGT48004 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Galileo
Technology GT-48004A Four Port Fast Ethernet
Switch for Multiport 10/100BASE-X Systems."
::= { dot3ChipSetGalileo 3 }
dot3ChipSetGalileoGT48207 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Galileo
Technology GT-48207 Low-Cost 10 Port Switched
Ethernet Controller for 10+10/100BASE-X."
::= { dot3ChipSetGalileo 4 }
dot3ChipSetGalileoGT48208 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Galileo
Technology GT-48208 Advanced 10 Port Switched
Ethernet Controller for 10+10/100BASE-X."
::= { dot3ChipSetGalileo 5 }
dot3ChipSetGalileoGT48212 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Galileo
Technology GT-48212 Advanced 14 Port Switched
Ethernet Controller for 10+10/100BASE-X."
::= { dot3ChipSetGalileo 6 }
dot3ChipSetJato OBJECT IDENTIFIER ::= { dot3ChipSets 11 }
dot3ChipSetJatoJT1001 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the Jato
Technologies JT1001 GigEMAC Server
10/100/1000Mbps Ethernet Controller with PCI
interface."
::= { dot3ChipSetJato 1 }
dot3ChipSetXaQti OBJECT IDENTIFIER ::= { dot3ChipSets 12 }
dot3ChipSetXaQtiXQ11800FP OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the XaQTI
XQ11800FP XMAC II Gigabit Ethernet Media Access
Controller."
::= { dot3ChipSetXaQti 1 }
dot3ChipSetXaQtiXQ18110FP OBJECT-IDENTITY
STATUS current
DESCRIPTION "The authoritative identifier for the XaQTI
XQ18110FP GigaPower Protocol Accelerator."
::= { dot3ChipSetXaQti 2 }
-- For those chipsets not represented above, OBJECT IDENTIFIER
-- assignment is required in other documentation, e.g.,
-- assignment within that part of the registration tree
-- delegated to individual enterprises (see RFC1155 and
-- RFC1902).
--
-- In the future, management of chipset registrations may be
-- delegated to the Internet Assigned Numbers Authority (IANA).
-- conformance information
etherConformance OBJECT IDENTIFIER ::= { etherMIB 2 }
etherGroups OBJECT IDENTIFIER ::= { etherConformance 1 }
etherCompliances OBJECT IDENTIFIER ::= { etherConformance 2 }
-- compliance statements
etherCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for managed network
entities which have ethernet-like network
interfaces."
MODULE -- this module
MANDATORY-GROUPS { etherStatsGroup }
GROUP etherCollisionTableGroup
DESCRIPTION "This group is optional. It is appropriate
for all systems which have the necessary
metering. Implementation in such systems is
highly recommended."
::= { etherCompliances 1 }
ether100MbsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for managed network
entities which have 100 Mb/sec ethernet-like
network interfaces."
MODULE -- this module
MANDATORY-GROUPS { etherStats100MbsGroup }
GROUP etherCollisionTableGroup
DESCRIPTION "This group is optional. It is appropriate
for all systems which have the necessary
metering. Implementation in such systems is
highly recommended."
::= { etherCompliances 2 }
-- units of conformance
etherStatsGroup OBJECT-GROUP
OBJECTS { dot3StatsIndex,
dot3StatsAlignmentErrors,
dot3StatsFCSErrors,
dot3StatsSingleCollisionFrames,
dot3StatsMultipleCollisionFrames,
dot3StatsSQETestErrors,
dot3StatsDeferredTransmissions,
dot3StatsLateCollisions,
dot3StatsExcessiveCollisions,
dot3StatsInternalMacTransmitErrors,
dot3StatsCarrierSenseErrors,
dot3StatsFrameTooLongs,
dot3StatsInternalMacReceiveErrors,
dot3StatsEtherChipSet
}
STATUS current
DESCRIPTION "A collection of objects providing information
applicable to all ethernet-like network
interfaces."
::= { etherGroups 1 }
etherCollisionTableGroup OBJECT-GROUP
OBJECTS { dot3CollFrequencies
}
STATUS current
DESCRIPTION "A collection of objects providing a histogram
of packets successfully transmitted after
experiencing exactly N collisions."
::= { etherGroups 2 }
etherStats100MbsGroup OBJECT-GROUP
OBJECTS { dot3StatsIndex,
dot3StatsAlignmentErrors,
dot3StatsFCSErrors,
dot3StatsSingleCollisionFrames,
dot3StatsMultipleCollisionFrames,
dot3StatsDeferredTransmissions,
dot3StatsLateCollisions,
dot3StatsExcessiveCollisions,
dot3StatsInternalMacTransmitErrors,
dot3StatsCarrierSenseErrors,
dot3StatsFrameTooLongs,
dot3StatsInternalMacReceiveErrors,
dot3StatsEtherChipSet,
dot3StatsSymbolErrors
}
STATUS current
DESCRIPTION "A collection of objects providing information
applicable to 100 Mb/sec ethernet-like network
interfaces."
::= { etherGroups 3 }
END
5. Intellectual Property
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such
proprietary rights by implementors or users of this specification can
be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
6. Acknowledgements
This document was produced by the 802.3 Hub MIB Working Group.
This document is almost completely based on both the Standard
Ethernet MIB, RFC1643 [10], and the Proposed Standard Ethernet MIB
using the SNMPv2 SMI, RFC1650 [11], both of which were edited by
Frank Kastenholz of FTP Software and produced by the Ethernet MIB
Working Group. This document extends those documents by providing
support for 100 Mb/sec ethernet interfaces as outlined in [6].
RFC1643 and RFC1650, in turn, are based on the Draft Standard
Ethernet MIB, RFC1398 [9], also edited by Frank Kastenholz and
produced by the Ethernet MIB Working Group.
RFC1398, in turn, is based on the Proposed Standard Ethernet MIB,
RFC1284 [8], which was edited by John Cook of Chipcom and produced
by the Transmission MIB Working Group. The Ethernet MIB Working
Group gathered implementation experience of the variables specified
in RFC1284 and used that information to develop this revised MIB.
RFC1284, in turn, is based on a document written by Frank
Kastenholz, then of Interlan, entitled IEEE 802.3 Layer Management
Draft M compatible MIB for TCP/IP Networks [7]. This document has
been modestly reworked, initially by the SNMP Working Group, and then
by the Transmission Working Group, to reflect the current conventions
for defining objects for MIB interfaces. James Davin, of the MIT
Laboratory for Computer Science, and Keith McCloghrie of Hughes LAN
Systems, contributed to later drafts of this memo. Marshall Rose of
Performance Systems International, Inc. converted the document into
its current concise format. Anil Rijsinghani of DEC contributed text
that more adequately describes the TDR test. Thanks to Frank
Kastenholz of Interlan and Louis Steinberg of IBM for their
experimentation.
7. References
[1] Information processing systems - Open Systems Interconnection -
Specification of Abstract Syntax Notation One (ASN.1),
International Organization for Standardization, International
Standard 8824, December 1987.
[2] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
Waldbusser, "Structure of Management Information for Version 2 of
the Simple Network Management Protocol (SNMPv2)", RFC1902,
January 1996.
[3] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
Waldbusser, "Textual Conventions for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC1903, January 1996.
[4] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S.
Waldbusser, "Conformance Statements for Version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC1904, January 1996.
[5] IEEE, IEEE 802.3 Layer Management, November 1988.
[6] IEEE, IEEE 802.3u-1995, "10 & 100 Mb/s Management," Section 30,
Supplement to IEEE Std 802.3, October 26, 1995.
[7] Kastenholz, F., "IEEE 802.3 Layer Management Draft compatible MIB
for TCP/IP Networks", electronic mail message to mib-
wg@nnsc.nsf.net, 9 June 1989.
[8] Cook, J., "Definitions of Managed Objects for Ethernet-Like
Interface Types", RFC1284, December 1991.
[9] Kastenholz, F., "Definitions of Managed Objects for the
Ethernet-like Interface Types", RFC1398, January 1993.
[10] Kastenholz, F., "Definitions of Managed Objects for the
Ethernet-like Interface Types", RFC1643, July 1994.
[11] Kastenholz, F., "Definitions of Managed Objects for the
Ethernet-like Interface Types using SMIv2", RFC1650, August
1994.
[12] McCloghrie, K., and F. Kastenholz, "The Interfaces Group MIB
using SMIv2", RFC2233, Cisco Systems, November 1997.
[13] Bradner, S., "Key words for use in RFCs to Indicate Requirements
Levels", BCP 14, RFC2119, March 1997.
[14] deGraaf, K., Romascanu, D., McMaster, D., McCloghrie, K., and S.
Roberts, "Definitions of Managed Objects for IEEE 802.3 Medium
Attachment Units (MAUs) using SMIv2", RFC2239, November 1997.
[15] Kastenholz, F., "Implementation Notes and Experience for The
Internet Ethernet MIB", RFC1369, October 1992.
[16] McCloghrie, K., and M. Rose, Editors, "Management Information
Base for Network Management of TCP/IP-based internets: MIB-II",
STD 17, RFC1213, March 1991.
[17] Blumenthal, U., and B. Wijnen, "User-based Security Model (USM)
for version 3 of the Simple Network Management Protocol
(SNMPv3)", RFC2274, January 1998.
[18] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access
Control Model for the Simple Network Management Protocol (SNMP)",
RFC2275, January 1998.
8. Security Considerations
There are no management objects defined in this MIB that have a MAX-
ACCESS clause of read-write and/or read-create. So, if this MIB is
implemented correctly, then there is no risk that an intruder can
alter or create any management objects of this MIB via direct SNMP
SET operations.
There are a number of managed objects in this MIB that may be
considered to contain sensitive information. In particular, the
dot3StatsEtherChipSet object may be considered sensitive in many
environments, since it would allow an intruder to obtain information
about which vendor's equipment is in use on the network.
Therefore, it may be important in some environments to control read
access to these objects and possibly to even encrypt the values of
these object when sending them over the network via SNMP. Not all
versions of SNMP provide features for such a secure environment.
SNMPv1 by itself is such an insecure environment. Even if the
network itself is secure (for example by using IPSec), even then,
there is no control as to who on the secure network is allowed to
access and GET (read) the objects in this MIB.
It is recommended that the implementors consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC2274 [17] and the View-based
Access Control Model RFC2275 [18] is recommended.
It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to those objects only to those principals
(users) that have legitimate rights to access them.
9. Authors' Addresses
John Flick
Hewlett-Packard Company
8000 Foothills Blvd. M/S 5556
Roseville, CA 95747-5556
Phone: +1 916 785 4018
EMail: johnf@hprnd.rose.hp.com
Jeffrey Johnson
RedBack Networks
2570 North First Street, Suite 410
San Jose, CA, 95131, USA
Phone: +1 408 571 2699
EMail: jeff@redbacknetworks.com
A. Change Log
This section enumerates changes made to RFC1650 to produce this
document.
(1) The MODULE-IDENTITY has been updated to reflect the changes
in the MIB.
(2) A new object, dot3StatsSymbolErrors, has been added.
(3) The definition of the object dot3StatsIndex has been
converted to use the SMIv2 OBJECT-TYPE macro.
(4) A new conformance group, etherStats100MbsGroup, has been
added.
(5) A new compliance statement, ether100MbsCompliance, has
been added.
(6) The Acknowledgements were extended to provide a more
complete history of the origin of this document.
(7) The discussion of ifType has been expanded.
(8) A section on mapping of Interfaces MIB objects has
been added.
(9) A section defining the relationship of this MIB to
the MAU MIB has been added.
(10) A section on the mapping of IEEE 802.3 managed objects
to this MIB and the Interfaces MIB has been added.
(11) Converted the dot3Tests, dot3Errors, and dot3ChipSets
OIDs to use the OBJECT-IDENTITY macro.
(12) Added to the list of registered dot3ChipSets.
(13) An intellectual property notice and copyright notice
were added, as required by RFC2026.
B. Full Copyright Statement
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.