0-255."
::= { appnNnTgTopologyFREntry 4 }
appnNnTgFREntryTimeLeft OBJECT-TYPE
SYNTAX AppnTopologyEntryTimeLeft
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of days before deletion of this network node TG entry
if it is not operational or has an odd (inconsistent) RSN."
::= { appnNnTgTopologyFREntry 5 }
appnNnTgFRDestVirtual OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the destination node is a virtual routing
node."
::= { appnNnTgTopologyFREntry 6 }
appnNnTgFRDlcData OBJECT-TYPE
SYNTAX AppnTgDlcData
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DLC-specific data related to a link connection network."
::= { appnNnTgTopologyFREntry 7 }
appnNnTgFRRsn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current owning node's resource sequence number for this
resource. An odd number indicates that information about the
resource is inconsistent.
This object corresponds to the numeric value in cv47, bytes
2-5"
::= { appnNnTgTopologyFREntry 8 }
appnNnTgFROperational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is operational.
This object corresponds to cv47, byte 6, bit 0."
::= { appnNnTgTopologyFREntry 9 }
appnNnTgFRQuiescing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is quiescing.
If the TG owner is either an extended border node or a
branch-aware network node (indicated, respectively, by
the appnNnNodeFRExteBorderSup and appnNnNodeFRBranchAwareness
objects in the corresponding appnNnTopologyFREntry), then
this indicator is artificially set to TRUE in the APPN
topology database, to remove the TG from other nodes'
route calculations. A management application can
determine whether the TG is actually quiescing by
examining its appnLocalTgQuiescing object at the TG owner.
This object corresponds to cv47, byte 6, bit 2."
::= { appnNnTgTopologyFREntry 10 }
appnNnTgFRCpCpSession OBJECT-TYPE
SYNTAX INTEGER {
supportedUnknownStatus(1),
supportedActive(2),
notSupported(3),
supportedNotActive(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether CP-CP sessions are supported on this TG, and
whether the TG owner's contention-winner session is active on
this TG. Some nodes in the network are not able to
differentiate support and status of CP-CP sessions, and thus
may report the 'supportedUnknownStatus' value.
This object corresponds to cv47, byte 6, bits 3-4."
::= { appnNnTgTopologyFREntry 11 }
appnNnTgFREffCap OBJECT-TYPE
SYNTAX AppnTgEffectiveCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Effective capacity for this TG."
::= { appnNnTgTopologyFREntry 12 }
appnNnTgFRConnCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cost per connect time.
This is an administratively assigned value representing the
relative cost per unit of time to use this TG. Range is from
0, which means no cost, to 255, which indicates maximum cost.
This object corresponds to cv47, byte 13."
::= { appnNnTgTopologyFREntry 13 }
appnNnTgFRByteCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cost per byte transmitted.
This is an administratively assigned value representing the
relative cost of transmitting a byte over this TG. Range is
from 0, which means no cost, to 255, which indicates maximum
cost.
This object corresponds to cv47, byte 14."
::= { appnNnTgTopologyFREntry 14 }
appnNnTgFRSecurity OBJECT-TYPE
SYNTAX AppnTgSecurity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned security level of this TG.
This object corresponds to cv47, byte 16."
::= { appnNnTgTopologyFREntry 15 }
appnNnTgFRDelay OBJECT-TYPE
SYNTAX AppnTgDelay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned delay associated with this TG.
This object corresponds to cv47, byte 17."
::= { appnNnTgTopologyFREntry 16 }
appnNnTgFRUsr1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
This object corresponds to cv47, byte 19."
::= { appnNnTgTopologyFREntry 17 }
appnNnTgFRUsr2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
This object corresponds to cv47, byte 20."
::= { appnNnTgTopologyFREntry 18 }
appnNnTgFRUsr3 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Third user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
This object corresponds to cv47, byte 21."
::= { appnNnTgTopologyFREntry 19 }
appnNnTgFRGarbageCollect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the TG has been marked for garbage
collection (deletion from the topology database) upon the next
garbage collection cycle.
This object corresponds to cv47, byte 6, bit 1."
::= { appnNnTgTopologyFREntry 20 }
appnNnTgFRSubareaNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subarea number associated with this TG.
This object corresponds to cv4680, bytes m+2 through m+5."
::= { appnNnTgTopologyFREntry 21 }
appnNnTgFRHprSup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether high performance routing (HPR)
is supported over this TG.
This object corresponds to cv4680, byte m+1, bit 2."
::= { appnNnTgTopologyFREntry 22 }
appnNnTgFRDestHprTrans OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the destination node supports
high performance routing (HPR) transport tower.
This object corresponds to cv4680, byte m+1, bit 7."
::= { appnNnTgTopologyFREntry 23 }
appnNnTgFRTypeIndicator OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
appnOrBfTg(2),
interchangeTg(3),
virtualRouteTg(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of the TG.
This object corresponds to cv4680, byte m+1, bits 3-4."
::= { appnNnTgTopologyFREntry 24 }
appnNnTgFRIntersubnet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is an intersubnet TG,
which defines a border between subnetworks.
This object corresponds to cv4680, byte m+1, bit 5."
::= { appnNnTgTopologyFREntry 25 }
appnNnTgFRMltgLinkType OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the transmission group is a
multi-link TG. A TG that has been brought up as a multi-link
TG is reported as one, even if it currently has only one link
active.
This object corresponds to cv47, byte 6, bit 5."
::= { appnNnTgTopologyFREntry 26 }
appnNnTgFRBranchTg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is a branch TG
(equivalently, whether the destination of the transmission
group is a branch network node).
This object corresponds to cv4680, byte m+1, bit 1."
::= { appnNnTgTopologyFREntry 27 }
-- ************** The APPN Local Topology Group ************************
-- This MIB Group represents the local topology maintained in
-- APPN network nodes, end nodes, and branch network nodes. It consists
-- of two tables:
-- - a table containing information about all of the TGs owned
-- by this node, which is implemented by all node types.
-- - a table containing all of the information known to this node
-- about the TGs owned by its end nodes, which is implemented only
-- by network nodes.
appnLocalTopology OBJECT IDENTIFIER ::= { appnObjects 3 }
-- APPN Local Transmission Group (TG) table
-- This table describes the TGs associated with this node only.
appnLocalTgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnLocalTgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TG Table describes all of the TGs owned by this node. The TG
destination can be a virtual node, network node, LEN node, or
end node."
::= { appnLocalTopology 1 }
appnLocalTgEntry OBJECT-TYPE
SYNTAX AppnLocalTgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is indexed by the destination CpName and the TG
number."
INDEX
{appnLocalTgDest,
appnLocalTgNum}
::= { appnLocalTgTable 1 }
AppnLocalTgEntry ::= SEQUENCE {
appnLocalTgDest SnaControlPointName,
appnLocalTgNum INTEGER,
appnLocalTgDestVirtual TruthValue,
appnLocalTgDlcData AppnTgDlcData,
appnLocalTgPortName DisplayString,
appnLocalTgQuiescing TruthValue,
appnLocalTgOperational TruthValue,
appnLocalTgCpCpSession INTEGER,
appnLocalTgEffCap AppnTgEffectiveCapacity,
appnLocalTgConnCost INTEGER,
appnLocalTgByteCost INTEGER,
appnLocalTgSecurity AppnTgSecurity,
appnLocalTgDelay AppnTgDelay,
appnLocalTgUsr1 INTEGER,
appnLocalTgUsr2 INTEGER,
appnLocalTgUsr3 INTEGER,
appnLocalTgHprSup INTEGER,
appnLocalTgIntersubnet TruthValue,
appnLocalTgMltgLinkType TruthValue,
appnLocalTgBranchLinkType INTEGER
}
appnLocalTgDest OBJECT-TYPE
SYNTAX SnaControlPointName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Administratively assigned name of the destination node for
this TG. This is the fully qualified name of a network node,
end node, LEN node, or virtual routing node."
::= { appnLocalTgEntry 1 }
appnLocalTgNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Number associated with this transmission group."
::= { appnLocalTgEntry 2 }
appnLocalTgDestVirtual OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the destination node for this TG is a
virtual routing node."
::= { appnLocalTgEntry 3 }
appnLocalTgDlcData OBJECT-TYPE
SYNTAX AppnTgDlcData
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DLC-specific data related to a link connection network."
::= { appnLocalTgEntry 4 }
appnLocalTgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned name for the local port associated
with this TG. A zero-length string indicates that this value
is unknown."
::= { appnLocalTgEntry 5 }
appnLocalTgQuiescing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is quiescing."
::= { appnLocalTgEntry 6 }
appnLocalTgOperational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is operational."
::= { appnLocalTgEntry 7 }
appnLocalTgCpCpSession OBJECT-TYPE
SYNTAX INTEGER {
supportedUnknownStatus(1),
supportedActive(2),
notSupported(3),
supportedNotActive(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether CP-CP sessions are supported on this TG, and
whether the TG owner's contention-winner session is active on
this TG. Some nodes in the network are not able to
differentiate support and status of CP-CP sessions, and thus
may report the 'supportedUnknownStatus' value."
::= { appnLocalTgEntry 8 }
appnLocalTgEffCap OBJECT-TYPE
SYNTAX AppnTgEffectiveCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Effective capacity for this TG."
::= { appnLocalTgEntry 9 }
appnLocalTgConnCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cost per connect time: a value representing the relative cost
per unit of time to use the TG. Range is from 0, which means
no cost, to 255."
::= { appnLocalTgEntry 10 }
appnLocalTgByteCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255."
::= { appnLocalTgEntry 11 }
appnLocalTgSecurity OBJECT-TYPE
SYNTAX AppnTgSecurity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned security level of this TG."
::= { appnLocalTgEntry 12 }
appnLocalTgDelay OBJECT-TYPE
SYNTAX AppnTgDelay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned delay associated with this TG."
::= { appnLocalTgEntry 13 }
appnLocalTgUsr1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG."
::= { appnLocalTgEntry 14 }
appnLocalTgUsr2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG."
::= { appnLocalTgEntry 15 }
appnLocalTgUsr3 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Third user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG."
::= { appnLocalTgEntry 16 }
appnLocalTgHprSup OBJECT-TYPE
SYNTAX INTEGER {
noHprSupport(1),
hprBaseOnly(2),
rtpTower(3),
controlFlowsOverRtpTower(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the level of high performance routing (HPR) support
over this TG :
noHprSupport(1) - no HPR support
hprBaseOnly(2) - HPR base (option set 1400)
supported
rtpTower(3) - HPR base and RTP tower
(option set 1401) supported
controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
control flows over RTP
(option set 1402) supported"
::= { appnLocalTgEntry 17 }
appnLocalTgIntersubnet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is an intersubnet TG,
which defines a border between subnetworks."
::= { appnLocalTgEntry 18 }
appnLocalTgMltgLinkType OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the transmission group is a
multi-link TG. A TG that has been brought up as a multi-link
TG is reported as one, even if it currently has only one link
active."
::= { appnLocalTgEntry 19 }
appnLocalTgBranchLinkType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
uplink(2),
downlink(3),
downlinkToBranchNetworkNode(4),
none(5),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Branch link type of this TG:
other(1) = the agent has determined the TG's
branch link type to be a value other
than branch uplink or branch
downlink. This is the value used
for a connection network TG owned by
a branch network node.
uplink(2) = the TG is a branch uplink.
downlink(3) = the TG is a branch downlink to an
end node.
downlinkToBranchNetworkNode(4) = the TG is a branch
downlink to a cascaded branch
network node.
none(5) = the TG is not a branch TG.
unknown(255) = the agent cannot determine the
branch link type of the TG."
::= { appnLocalTgEntry 20 }
-- APPN Local End Node Transmission Group (TG) table
-- This table describes the TGs associated with all of the end nodes
-- known to this node.
appnLocalEnTgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnLocalEnTgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table describing all of the TGs owned by the end nodes known
to this node via TG registration. This node does not represent
its own view of the TG on behalf of the partner node in this
table. The TG destination can be a virtual routing node,
network node, or end node."
::= { appnLocalTopology 2 }
appnLocalEnTgEntry OBJECT-TYPE
SYNTAX AppnLocalEnTgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table requires multiple indexes to uniquely identify each
TG. They are originating CPname, destination CPname, and the
TG number."
INDEX
{appnLocalEnTgOrigin,
appnLocalEnTgDest,
appnLocalEnTgNum}
::= { appnLocalEnTgTable 1 }
AppnLocalEnTgEntry ::= SEQUENCE {
appnLocalEnTgOrigin SnaControlPointName,
appnLocalEnTgDest SnaControlPointName,
appnLocalEnTgNum INTEGER,
appnLocalEnTgEntryTimeLeft AppnTopologyEntryTimeLeft,
appnLocalEnTgDestVirtual TruthValue,
appnLocalEnTgDlcData AppnTgDlcData,
appnLocalEnTgOperational TruthValue,
appnLocalEnTgCpCpSession INTEGER,
appnLocalEnTgEffCap AppnTgEffectiveCapacity,
appnLocalEnTgConnCost INTEGER,
appnLocalEnTgByteCost INTEGER,
appnLocalEnTgSecurity AppnTgSecurity,
appnLocalEnTgDelay AppnTgDelay,
appnLocalEnTgUsr1 INTEGER,
appnLocalEnTgUsr2 INTEGER,
appnLocalEnTgUsr3 INTEGER,
appnLocalEnTgMltgLinkType TruthValue
}
appnLocalEnTgOrigin OBJECT-TYPE
SYNTAX SnaControlPointName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Administratively assigned name of the origin node for this
TG. This is a fully qualified network name."
::= { appnLocalEnTgEntry 1 }
appnLocalEnTgDest OBJECT-TYPE
SYNTAX SnaControlPointName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Administratively assigned name of the destination node for
this TG. This is the fully qualified name of a network node,
end node, LEN node, or virtual routing node."
::= { appnLocalEnTgEntry 2 }
appnLocalEnTgNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Number associated with this transmission group."
::= { appnLocalEnTgEntry 3 }
appnLocalEnTgEntryTimeLeft OBJECT-TYPE
SYNTAX AppnTopologyEntryTimeLeft
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of days before deletion of this end node TG entry."
::= { appnLocalEnTgEntry 4 }
appnLocalEnTgDestVirtual OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the destination node is a virtual routing
node."
::= { appnLocalEnTgEntry 5 }
appnLocalEnTgDlcData OBJECT-TYPE
SYNTAX AppnTgDlcData
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DLC-specific data related to a link connection network."
::= { appnLocalEnTgEntry 6 }
appnLocalEnTgOperational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the transmission group is operational."
::= { appnLocalEnTgEntry 7 }
appnLocalEnTgCpCpSession OBJECT-TYPE
SYNTAX INTEGER {
supportedUnknownStatus(1),
supportedActive(2),
notSupported(3),
supportedNotActive(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether CP-CP sessions are supported on this TG, and
whether the TG owner's contention-winner session is active on
this TG. Some nodes in the network are not able to
differentiate support and status of CP-CP sessions, and thus
may report the 'supportedUnknownStatus' value."
::= { appnLocalEnTgEntry 8 }
appnLocalEnTgEffCap OBJECT-TYPE
SYNTAX AppnTgEffectiveCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Effective capacity for this TG."
::= { appnLocalEnTgEntry 9 }
appnLocalEnTgConnCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cost per connect time: a value representing the relative cost
per unit of time to use the TG. Range is from 0, which means
no cost, to 255."
::= { appnLocalEnTgEntry 10 }
appnLocalEnTgByteCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Relative cost of transmitting a byte over this link.
Range is from 0, which means no cost, to 255."
::= { appnLocalEnTgEntry 11 }
appnLocalEnTgSecurity OBJECT-TYPE
SYNTAX AppnTgSecurity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned security level of this TG."
::= { appnLocalEnTgEntry 12 }
appnLocalEnTgDelay OBJECT-TYPE
SYNTAX AppnTgDelay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned delay associated with this TG."
::= { appnLocalEnTgEntry 13 }
appnLocalEnTgUsr1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG."
::= { appnLocalEnTgEntry 14 }
appnLocalEnTgUsr2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG."
::= { appnLocalEnTgEntry 15 }
appnLocalEnTgUsr3 OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Third user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG."
::= { appnLocalEnTgEntry 16 }
appnLocalEnTgMltgLinkType OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the transmission group is a
multi-link TG. A TG that has been brought up as a multi-link
TG is reported as one, even if it currently has only one link
active."
::= { appnLocalEnTgEntry 17 }
-- ************** The APPN Directory Group *****************************
appnDir OBJECT IDENTIFIER ::= { appnObjects 4 }
appnDirPerf OBJECT IDENTIFIER ::= { appnDir 1 }
-- The APPN Directory Group
-- The APPN Directory Database
-- Each APPN network node and branch network node maintains directories
-- containing information on which LUs (applications) are available and
-- where they are located. LUs can be located in an APPN network node,
-- in any of its attached end nodes or branch network nodes, or in any
-- of the nodes below one of its attached branch network nodes.
appnDirMaxCaches OBJECT-TYPE
SYNTAX Unsigned32
UNITS "directory entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of cache entries allowed. This is an
administratively assigned value."
::= { appnDirPerf 1 }
appnDirCurCaches OBJECT-TYPE
SYNTAX Gauge32
UNITS "directory entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of cache entries."
::= { appnDirPerf 2 }
appnDirCurHomeEntries OBJECT-TYPE
SYNTAX Gauge32
UNITS "directory entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of home entries."
::= { appnDirPerf 3 }
appnDirRegEntries OBJECT-TYPE
SYNTAX Gauge32
UNITS "directory entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of registered entries."
::= { appnDirPerf 4 }
appnDirInLocates OBJECT-TYPE
SYNTAX AppnNodeCounter
UNITS "Locate messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of directed Locates received since the node was last
reinitialized."
::= { appnDirPerf 5 }
appnDirInBcastLocates OBJECT-TYPE
SYNTAX AppnNodeCounter
UNITS "Locate messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast Locates received since the node was last
reinitialized."
::= { appnDirPerf 6 }
appnDirOutLocates OBJECT-TYPE
SYNTAX AppnNodeCounter
UNITS "Locate messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of directed Locates sent since the node was last
reinitialized."
::= { appnDirPerf 7 }
appnDirOutBcastLocates OBJECT-TYPE
SYNTAX AppnNodeCounter
UNITS "Locate messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast Locates sent since the node was last
reinitialized."
::= { appnDirPerf 8 }
appnDirNotFoundLocates OBJECT-TYPE
SYNTAX AppnNodeCounter
UNITS "Locate messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of directed Locates returned with a 'not found' since
the node was last reinitialized."
::= { appnDirPerf 9 }
appnDirNotFoundBcastLocates OBJECT-TYPE
SYNTAX AppnNodeCounter
UNITS "Locate messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast Locates returned with a 'not found' since
the node was last reinitialized."
::= { appnDirPerf 10 }
appnDirLocateOutstands OBJECT-TYPE
SYNTAX Gauge32
UNITS "Locate messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of outstanding Locates, both directed and
broadcast. This value varies. A value of zero indicates
that no Locates are unanswered."
::= { appnDirPerf 11 }
--APPN Directory table
-- This table contains information about all known LUs.
appnDirTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnDirEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing information about all known LUs."
::= { appnDir 2 }
appnDirEntry OBJECT-TYPE
SYNTAX AppnDirEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is indexed by the LU name."
INDEX
{appnDirLuName}
::= { appnDirTable 1 }
AppnDirEntry ::= SEQUENCE {
appnDirLuName DisplayString,
appnDirNnServerName SnaControlPointName,
appnDirLuOwnerName SnaControlPointName,
appnDirLuLocation INTEGER,
appnDirType INTEGER,
appnDirApparentLuOwnerName DisplayString
}
appnDirLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fully qualified network LU name in the domain of the
serving network node. Entries take one of three forms:
- Explicit entries do not contain the character '*'.
- Partial wildcard entries have the form 'ccc*', where
'ccc' represents one to sixteen characters in a
legal SNA LuName.
- A full wildcard entry consists of the single
character '*'"
::= { appnDirEntry 1 }
appnDirNnServerName OBJECT-TYPE
SYNTAX SnaControlPointName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fully qualified control point (CP) name of the network node
server. For unassociated end node entries, a zero-length
string is returned."
::= { appnDirEntry 2 }
appnDirLuOwnerName OBJECT-TYPE
SYNTAX SnaControlPointName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fully qualified CP name of the node at which the LU is
located. This name is the same as the serving NN name when
the LU is located at a network node. It is also the same as
the fully qualified LU name when this is the control point
LU for this node."
::= { appnDirEntry 3 }
appnDirLuLocation OBJECT-TYPE
SYNTAX INTEGER {
local(1), --Local
domain(2), --Domain
xdomain(3) --Cross Domain
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the location of the LU with respect to the local
node."
::= { appnDirEntry 4 }
appnDirType OBJECT-TYPE
SYNTAX INTEGER {
home(1), --defined as home entry
cache(2), --learned over time
registered(3) --registered by end node
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Directory types are:
1 - Home
The LU is in the domain of the local node, and the LU
information has been configured at the local node.
2 - Cache
The LU has previously been located by a broadcast
search, and the location information has been saved.
3 - Registered
The LU is at an end node that is in the domain
of the local network node. Registered entries
are registered by the served end node."
::= { appnDirEntry 5 }
appnDirApparentLuOwnerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0 | 3..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fully qualified CP name of the node at which the LU appears to
be located. This object and the appnDirLuOwnerName object are
related as follows:
Implementations that support this object save in their
directory database information about an LU's owning control
point that was communicated in two control vectors:
- an Associated Resource Entry (X'3C') CV with resource
type X'00F4' (ENCP)
- a Real Owning Control Point (X'4A') CV.
The X'4A' CV is created by a branch network node to preserve
the name of the real owning control point for an LU below the
branch network node, before it overwrites this name with its
own name in the X'3C' CV. The X'4A' CV is not present for LUs
that are not below branch network nodes.
If the information a node has about an LU's owning CP came only
in a X'3C' CV, then the name from the X'3C' is returned in the
appnDirLuOwnerName object, and a null string is returned in
this object.
If the information a node has about an LU's owning CP came in
both X'3C' and X'4A' CVs, then the name from the X'4A' is
returned in the appnDirLuOwnerName object, and the name from
the X'3C' (which will be the branch network node's name) is
returned in this object."
::= { appnDirEntry 6 }
-- ************** The APPN Class of Service Group **********************
appnCos OBJECT IDENTIFIER ::= { appnObjects 5 }
-- The APPN Class of Service (COS)
-- Class of Service is a means of expressing the quality of routes and
-- the transmission priority of traffic that flows on these routes.
-- The quality of routes is specified by two tables, a COS weight table
-- for TGs and a COS weight table for nodes. Values in these COS tables
-- are administratively assigned at each APPN node, with seven default
-- tables specified by the APPN architecture.
-- *********************************************************************
appnCosModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnCosModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table representing all of the defined mode names for this
node. The table contains the matching COS name for each
mode name."
::= { appnCos 1 }
appnCosModeEntry OBJECT-TYPE
SYNTAX AppnCosModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is indexed by the mode name."
INDEX
{appnCosModeName}
::= { appnCosModeTable 1 }
AppnCosModeEntry ::= SEQUENCE {
appnCosModeName SnaModeName,
appnCosModeCosName SnaClassOfServiceName
}
appnCosModeName OBJECT-TYPE
SYNTAX SnaModeName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Administratively assigned name for this mode."
::= { appnCosModeEntry 1 }
appnCosModeCosName OBJECT-TYPE
SYNTAX SnaClassOfServiceName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administratively assigned name for this class of service."
::= { appnCosModeEntry 2 }
-- *********************************************************************
appnCosNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnCosNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table mapping all of the defined class-of-service names for
this node to their network transmission priorities."
::= { appnCos 2 }
appnCosNameEntry OBJECT-TYPE
SYNTAX AppnCosNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The COS name is the index to this table."
INDEX
{appnCosName}
::= { appnCosNameTable 1 }
AppnCosNameEntry ::= SEQUENCE {
appnCosName SnaClassOfServiceName,
appnCosTransPriority INTEGER
}
appnCosName OBJECT-TYPE
SYNTAX SnaClassOfServiceName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Administratively assigned name for this class of service."
::= { appnCosNameEntry 1 }
appnCosTransPriority OBJECT-TYPE
SYNTAX INTEGER {
low(1), --X'01'
medium(2), --X'02'
high(3), --X'03'
network(4) --X'04'
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmission priority for this class of service:
low(1) - (X'01'): low priority
medium(2) - (X'02'): medium priority
high(3) - (X'03'): high priority
network(4) - (X'04'): network priority"
::= { appnCosNameEntry 2 }
-- *********************************************************************
appnCosNodeRowTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnCosNodeRowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all node-row information for all classes
of service defined in this node."
::= { appnCos 3 }
appnCosNodeRowEntry OBJECT-TYPE
SYNTAX AppnCosNodeRowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A node entry for a given class of service."
INDEX
{appnCosNodeRowName,
appnCosNodeRowIndex}
::= { appnCosNodeRowTable 1 }
AppnCosNodeRowEntry ::= SEQUENCE {
appnCosNodeRowName SnaClassOfServiceName,
appnCosNodeRowIndex INTEGER,
appnCosNodeRowWgt DisplayString,
appnCosNodeRowResistMin INTEGER,
appnCosNodeRowResistMax INTEGER,
appnCosNodeRowMinCongestAllow INTEGER,
appnCosNodeRowMaxCongestAllow INTEGER
}
appnCosNodeRowName OBJECT-TYPE
SYNTAX SnaClassOfServiceName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Administratively assigned name for this class of service."
::= { appnCosNodeRowEntry 1 }
appnCosNodeRowIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subindex under appnCosNodeRowName, corresponding to a row in
the node table for the class of service identified in
appnCosNodeRowName.
For each class of service, this subindex orders rows in the
appnCosNodeRowTable in the same order as that used for route
calculation in the APPN node."
::= { appnCosNodeRowEntry 2 }
appnCosNodeRowWgt OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Weight to be associated with the nodes that fit the criteria
specified by this node row.
This value can either be a character representation of an
integer, or a formula for calculating the weight."
::= { appnCosNodeRowEntry 3 }
appnCosNodeRowResistMin OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum route addition resistance value for this node.
Range of values is 0-255. The lower the value, the more
desirable the node is for intermediate routing."
::= { appnCosNodeRowEntry 4 }
appnCosNodeRowResistMax OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum route addition resistance value for this node.
Range of values is 0-255. The lower the value, the more
desirable the node is for intermediate routing."
::= { appnCosNodeRowEntry 5 }
appnCosNodeRowMinCongestAllow OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether low congestion will be tolerated. This
object and appnCosNodeRowMaxCongestAllow together delineate a
range of acceptable congestion states for a node. For the
ordered pair (minimum congestion allowed, maximum congestion
allowed), the values are interpreted as follows:
- (0,0): only low congestion is acceptable
- (0,1): either low or high congestion is acceptable
- (1,1): only high congestion is acceptable.
Note that the combination (1,0) is not defined, since it
would identify a range whose lower bound was high congestion
and whose upper bound was low congestion."
::= { appnCosNodeRowEntry 6 }
appnCosNodeRowMaxCongestAllow OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether low congestion will be tolerated. This
object and appnCosNodeRowMinCongestAllow together delineate a
range of acceptable congestion states for a node. For the
ordered pair (minimum congestion allowed, maximum congestion
allowed), the values are interpreted as follows:
- (0,0): only low congestion is acceptable
- (0,1): either low or high congestion is acceptable
- (1,1): only high congestion is acceptable.
Note that the combination (1,0) is not defined, since it
would identify a range whose lower bound was high congestion
and whose upper bound was low congestion."
::= { appnCosNodeRowEntry 7 }
-- *********************************************************************
appnCosTgRowTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppnCosTgRowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing all the TG-row information for all classes of
service defined in this node."
::= { appnCos 4 }
appnCosTgRowEntry OBJECT-TYPE
SYNTAX AppnCosTgRowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A TG entry for a given class of service."
INDEX
{appnCosTgRowName,
appnCosTgRowIndex}
::= { appnCosTgRowTable 1 }
AppnCosTgRowEntry ::= SEQUENCE {
appnCosTgRowName SnaClassOfServiceName,
appnCosTgRowIndex INTEGER,
appnCosTgRowWgt DisplayString,
appnCosTgRowEffCapMin AppnTgEffectiveCapacity,
appnCosTgRowEffCapMax AppnTgEffectiveCapacity,
appnCosTgRowConnCostMin INTEGER,
appnCosTgRowConnCostMax INTEGER,
appnCosTgRowByteCostMin INTEGER,
appnCosTgRowByteCostMax INTEGER,
appnCosTgRowSecurityMin AppnTgSecurity,
appnCosTgRowSecurityMax AppnTgSecurity,
appnCosTgRowDelayMin AppnTgDelay,
appnCosTgRowDelayMax AppnTgDelay,
appnCosTgRowUsr1Min INTEGER,
appnCosTgRowUsr1Max INTEGER,
appnCosTgRowUsr2Min INTEGER,
appnCosTgRowUsr2Max INTEGER,
appnCosTgRowUsr3Min INTEGER,
appnCosTgRowUsr3Max INTEGER
}
appnCosTgRowName OBJECT-TYPE
SYNTAX SnaClassOfServiceName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Administratively assigned name for this class of service."
::= { appnCosTgRowEntry 1 }
appnCosTgRowIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subindex under appnCosTgRowName, corresponding to a row in the
TG table for the class of service identified in
appnCosTgRowName.
For each class of service, this subindex orders rows in the
appnCosTgRowTable in the same order as that used for route
calculation in the APPN node."
::= { appnCosTgRowEntry 2 }
appnCosTgRowWgt OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Weight to be associated with the TGs that fit the criteria
specified by this TG row.
This value can either be a character representation of an
integer, or a formula for calculating the weight."
::= { appnCosTgRowEntry 3 }
appnCosTgRowEffCapMin OBJECT-TYPE
SYNTAX AppnTgEffectiveCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable capacity for this class of service."
::= { appnCosTgRowEntry 4 }
appnCosTgRowEffCapMax OBJECT-TYPE
SYNTAX AppnTgEffectiveCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable capacity for this class of service."
::= { appnCosTgRowEntry 5 }
appnCosTgRowConnCostMin OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable cost per connect time for this class of
service.
Cost per connect time: a value representing the relative
cost per unit of time to use this TG. Range is from 0, which
means no cost, to 255."
::= { appnCosTgRowEntry 6 }
appnCosTgRowConnCostMax OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable cost per connect time for this class of
service.
Cost per connect time: a value representing the relative
cost per unit of time to use this TG. Range is from 0, which
means no cost, to 255."
::= { appnCosTgRowEntry 7 }
appnCosTgRowByteCostMin OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable cost per byte transmitted for this class
of service.
Cost per byte transmitted: a value representing the relative
cost per unit of time to use this TG. Range is from 0, which
means no cost, to 255."
::= { appnCosTgRowEntry 8 }
appnCosTgRowByteCostMax OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable cost per byte transmitted for this class
of service.
Cost per byte transmitted: a value representing the relative
cost of transmitting a byte over this TG. Range is from 0,
which means no cost, to 255."
::= { appnCosTgRowEntry 9 }
appnCosTgRowSecurityMin OBJECT-TYPE
SYNTAX AppnTgSecurity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable security for this class of service."
::= { appnCosTgRowEntry 10 }
appnCosTgRowSecurityMax OBJECT-TYPE
SYNTAX AppnTgSecurity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable security for this class of service."
::= { appnCosTgRowEntry 11 }
appnCosTgRowDelayMin OBJECT-TYPE
SYNTAX AppnTgDelay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable propagation delay for this class of
service."
::= { appnCosTgRowEntry 12 }
appnCosTgRowDelayMax OBJECT-TYPE
SYNTAX AppnTgDelay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable propagation delay for this class of
service."
::= { appnCosTgRowEntry 13 }
appnCosTgRowUsr1Min OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable value for this user-defined
characteristic."
::= { appnCosTgRowEntry 14 }
appnCosTgRowUsr1Max OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable value for this user-defined
characteristic."
::= { appnCosTgRowEntry 15 }
appnCosTgRowUsr2Min OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable value for this user-defined
characteristic."
::= { appnCosTgRowEntry 16 }
appnCosTgRowUsr2Max OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable value for this user-defined
characteristic."
::= { appnCosTgRowEntry 17 }
appnCosTgRowUsr3Min OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum acceptable value for this user-defined
characteristic."
::= { appnCosTgRowEntry 18 }
appnCosTgRowUsr3Max OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum acceptable value for this user-defined
characteristic."
::= { appnCosTgRowEntry 19 }
-- *********************************************************************
-- Intermediate Session Information
-- *********************************************************************
appnSessIntermediate OBJECT IDENTIFIER ::= { appnObjects 6 }
-- *********************************************************************
-- Intermediate Session Information Global Objects
-- *********************************************************************
-- The following simple objects allow the collection of intermediate
-- session Information to be started and stopped.
-- *********************************************************************
appnIsInGlobal OBJECT IDENTIFIER ::= { appnSessIntermediate 1 }
appnIsInGlobeCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
notActive(1),
active(2),
ready(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object by which a Management Station can deactivate or
activate capture of intermediate-session counts and names, by
setting the value to notActive(1) or active(2), respectively.
The value ready(3) is returned on GET operations until a SET
has been processed; after that the value received on the most
recent SET is returned.
The counts referred to here are the eight objects in the
AppnIsInTable, from appnIsInP2SFmdPius through
appnIsInS2PNonFmdBytes. The names are the four objects in this
table, from appnIsInPriLuName through appnIsInCosName.
Setting this object to the following values has the following
effects:
notActive(1) stop collecting count data. If a count
is queried, it returns the value 0.
Collection of names may, but need not be,
disabled.
active(2) start collecting count data. If it is
supported, collection of names is enabled."
::= { appnIsInGlobal 1 }
appnIsInGlobeCtrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notActive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not the intermediate session counts
are active. The counts referred to here are the eight
objects in the AppnIsInTable, from appnIsInP2SFmdPius through
appnIsInS2PNonFmdBytes. These eight counts are of type
Unsigned32 rather than Counter32 because when this object
enters the notActive state, either because a Management
Station has set appnInInGlobeCtrAdminStatus to notActive or
because of a locally-initiated transition, the counts are
all reset to 0.
The values for this object are:
notActive(1): collection of counts is not active; if it
is queried, a count returns the value 0.
active(2): collection of counts is active."
::= { appnIsInGlobal 2 }
appnIsInGlobeCtrStatusTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "hundredths of a second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the appnIsInGlobeCtrOperStatus object last
changed, measured in hundredths of a second. This time can be
used to identify when this change occurred in relation to other
events in the agent, such as the last time the APPN node was
reinitialized."
::= { appnIsInGlobal 3 }
appnIsInGlobeRscv OBJECT-TYPE
SYNTAX INTEGER {
notActive(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the current route selection control vector (RSCV)
collection option in effect, and allows a Management Station to
change the option.
The values for this object are:
notActive(1): collection of route selection control vectors
is not active.
active(2): collection of route selection control vectors
is active."
::= { appnIsInGlobal 4 }
appnIsInGlobeRscvTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "hundredths of a second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the appnIsInGlobeRscv object last changed,
measured in hundredths of a second. This time can be used to
identify when this change occurred in relation to other events
in the agent, such as the last time the APPN node was
reinitialized."
::= { appnIsInGlobal 5 }
appnIsInGlobeActSess OBJECT-TYPE
SYNTAX Gauge32
UNITS "sessions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active intermediate sessions."
::= { appnIsInGlobal 6 }
appnIsInGlobeHprBfActSess OBJECT-TYPE
SYNTAX Gauge32
UNITS "sessions"
MAX-ACCESS read-only