STATUS current
DESCRIPTION
"A threshold value to check against if mteTriggerType is
'threshold'.
When the delta value (difference) between the current sampled
value (value(n)) and the previous sampled value (value(n-1))
is greater than or equal to this threshold,
and the delta value calculated at the last sampling interval
(i.e. value(n-1) - value(n-2)) was less than this threshold,
one mteTriggerThresholdDeltaRisingEvent is triggered. That event
is also triggered if the first delta value calculated after this
entry becomes active, i.e. value(2) - value(1), where value(1)
is the first sample taken of that instance, is greater than or
equal to this threshold.
After a rising event is generated, another such event is not
triggered until the delta value falls below this threshold and
reaches mteTriggerThresholdDeltaFalling."
DEFVAL { 0 }
::= { mteTriggerThresholdEntry 4 }
mteTriggerThresholdDeltaFalling OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold value to check against if mteTriggerType is
'threshold'.
When the delta value (difference) between the current sampled
value (value(n)) and the previous sampled value (value(n-1))
is less than or equal to this threshold,
and the delta value calculated at the last sampling interval
(i.e. value(n-1) - value(n-2)) was greater than this threshold,
one mteTriggerThresholdDeltaFallingEvent is triggered. That event
is also triggered if the first delta value calculated after this
entry becomes active, i.e. value(2) - value(1), where value(1)
is the first sample taken of that instance, is less than or
equal to this threshold.
After a falling event is generated, another such event is not
triggered until the delta value falls below this threshold and
reaches mteTriggerThresholdDeltaRising."
DEFVAL { 0 }
::= { mteTriggerThresholdEntry 5 }
mteTriggerThresholdObjectsOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdObjects, the mteOwner of a group
of objects from mteObjectsTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 6 }
mteTriggerThresholdObjects OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteObjectsName of a group of objects from
mteObjectsTable. These objects are to be added to any
Notification resulting from the firing of this trigger for
this test.
A list of objects may also be added based on the overall
trigger, the event or other settings in mteTriggerTest.
A length of 0 indicates no additional objects."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 7 }
mteTriggerThresholdRisingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdRisingEvent, the mteOwner of an
event entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 8 }
mteTriggerThresholdRisingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdRising. A length of 0 indicates no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 9 }
mteTriggerThresholdFallingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdFallingEvent, the mteOwner of an
event entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 10 }
mteTriggerThresholdFallingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdFalling. A length of 0 indicates no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 11 }
mteTriggerThresholdDeltaRisingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdDeltaRisingEvent, the mteOwner
of an event entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 12 }
mteTriggerThresholdDeltaRisingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdDeltaRising. A length of 0 indicates
no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 13 }
mteTriggerThresholdDeltaFallingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdDeltaFallingEvent, the mteOwner
of an event entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 14 }
mteTriggerThresholdDeltaFallingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdDeltaFalling. A length of 0 indicates
no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 15 }
--
-- Objects Table
--
mteObjectsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that can be added to notifications based
on the trigger, trigger test, or event, as pointed to by
entries in those tables."
::= { mteObjects 1 }
mteObjectsEntry OBJECT-TYPE
SYNTAX MteObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A group of objects. Applications create and delete entries
using mteObjectsEntryStatus.
When adding objects to a notification they are added in the
lexical order of their index in this table. Those associated
with a trigger come first, then trigger test, then event."
INDEX { mteOwner, mteObjectsName, mteObjectsIndex }
::= { mteObjectsTable 1 }
MteObjectsEntry ::= SEQUENCE {
mteObjectsName SnmpAdminString,
mteObjectsIndex Unsigned32,
mteObjectsID OBJECT IDENTIFIER,
mteObjectsIDWildcard TruthValue,
mteObjectsEntryStatus RowStatus
}
mteObjectsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally-unique, administratively assigned name for a group
of objects."
::= { mteObjectsEntry 1 }
mteObjectsIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer for the purpose of identifying
individual objects within a mteObjectsName group.
Objects within a group are placed in the notification in the
numerical order of this index.
Groups are placed in the notification in the order of the
selections for overall trigger, trigger test, and event.
Within trigger test they are in the same order as the
numerical values of the bits defined for mteTriggerTest.
Bad object identifiers or a mismatch between truncating the
identifier and the value of mteDeltaDiscontinuityIDWildcard
result in operation as one would expect when providing the
wrong identifier to a Get operation. The Get will fail or get
the wrong object. If the object is not available it is omitted
from the notification."
::= { mteObjectsEntry 2 }
mteObjectsID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifier of a MIB object to add to a
Notification that results from the firing of a trigger.
This may be wildcarded by truncating all or part of the
instance portion, in which case the instance portion of the
OID for obtaining this object will be the same as that used
in obtaining the mteTriggerValueID that fired. If such
wildcarding is applied, mteObjectsIDWildcard must be
'true' and if not it must be 'false'.
Each instance that fills the wildcard is independent of any
additional instances, that is, wildcarded objects operate
as if there were a separate table entry for each instance
that fills the wildcard without having to actually predict
all possible instances ahead of time."
DEFVAL { zeroDotZero }
::= { mteObjectsEntry 3 }
mteObjectsIDWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Control for whether mteObjectsID is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard."
DEFVAL { false }
::= { mteObjectsEntry 4 }
mteObjectsEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows creation and deletion of entries.
Once made active an entry MAY not be modified except to
delete it."
::= { mteObjectsEntry 5 }
--
-- Event Section
--
-- Counters
mteEventFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an attempt to invoke an event
has failed. This counts individually for each
attempt in a group of targets or each attempt for a
wildcarded trigger object."
::= { mteEvent 1 }
--
-- Event Table
--
mteEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event action information."
::= { mteEvent 2 }
mteEventEntry OBJECT-TYPE
SYNTAX MteEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single event. Applications create and
delete entries using mteEventEntryStatus."
INDEX { mteOwner, IMPLIED mteEventName }
::= { mteEventTable 1 }
MteEventEntry ::= SEQUENCE {
mteEventName SnmpAdminString,
mteEventComment SnmpAdminString,
mteEventActions BITS,
mteEventEnabled TruthValue,
mteEventEntryStatus RowStatus
}
mteEventName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally-unique, administratively assigned name for the
event."
::= { mteEventEntry 1 }
mteEventComment OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A description of the event's function and use."
DEFVAL { ''H }
::= { mteEventEntry 2 }
mteEventActions OBJECT-TYPE
SYNTAX BITS { notification(0), set(1) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The actions to perform when this event occurs.
For 'notification', Traps and/or Informs are sent according
to the configuration in the SNMP Notification MIB.
For 'set', an SNMP Set operation is performed according to
control values in this entry."
DEFVAL { {} } -- No bits set.
::= { mteEventEntry 3 }
mteEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A control to allow an event to be configured but not used.
When the value is 'false' the event does not execute even if
triggered."
DEFVAL { false }
::= { mteEventEntry 4 }
mteEventEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows creation and deletion of entries.
Once made active an entry MAY not be modified except to
delete it."
::= { mteEventEntry 5 }
--
-- Event Notification Table
--
mteEventNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteEventNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about notifications to be sent as a
consequence of management events."
::= { mteEvent 3 }
mteEventNotificationEntry OBJECT-TYPE
SYNTAX MteEventNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single event's notification. Entries
automatically exist in this this table for each mteEventEntry
that has 'notification' set in mteEventActions."
INDEX { mteOwner, IMPLIED mteEventName }
::= { mteEventNotificationTable 1 }
MteEventNotificationEntry ::= SEQUENCE {
mteEventNotification OBJECT IDENTIFIER,
mteEventNotificationObjectsOwner SnmpAdminString,
mteEventNotificationObjects SnmpAdminString
}
mteEventNotification OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object identifier from the NOTIFICATION-TYPE for the
notification to use if metEventActions has 'notification' set."
DEFVAL { zeroDotZero }
::= { mteEventNotificationEntry 1 }
mteEventNotificationObjectsOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteEventNotificationObjects, the mteOwner of a
group of objects from mteObjectsTable."
DEFVAL { ''H }
::= { mteEventNotificationEntry 2 }
mteEventNotificationObjects OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteObjectsName of a group of objects from
mteObjectsTable if mteEventActions has 'notification' set.
These objects are to be added to any Notification generated by
this event.
Objects may also be added based on the trigger that stimulated
the event.
A length of 0 indicates no additional objects."
DEFVAL { ''H }
::= { mteEventNotificationEntry 3 }
--
-- Event Set Table
--
mteEventSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteEventSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event action information."
::= { mteEvent 4 }
mteEventSetEntry OBJECT-TYPE
SYNTAX MteEventSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single event's set option. Entries
automatically exist in this this table for each mteEventEntry
that has 'set' set in mteEventActions."
INDEX { mteOwner, IMPLIED mteEventName }
::= { mteEventSetTable 1 }
MteEventSetEntry ::= SEQUENCE {
mteEventSetObject OBJECT IDENTIFIER,
mteEventSetObjectWildcard TruthValue,
mteEventSetValue Integer32,
mteEventSetTargetTag SnmpTagValue,
mteEventSetContextName SnmpAdminString,
mteEventSetContextNameWildcard TruthValue
}
mteEventSetObject OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object identifier from the MIB object to set if
mteEventActions has 'set' set.
This object identifier may be wildcarded by leaving
sub-identifiers off the end, in which case
nteEventSetObjectWildCard must be 'true'.
If mteEventSetObject is wildcarded the instance used to set the
object to which it points is the same as the instance from the
value of mteTriggerValueID that triggered the event.
Each instance that fills the wildcard is independent of any
additional instances, that is, wildcarded objects operate
as if there were a separate table entry for each instance
that fills the wildcard without having to actually predict
all possible instances ahead of time.
Bad object identifiers or a mismatch between truncating the
identifier and the value of mteSetObjectWildcard
result in operation as one would expect when providing the
wrong identifier to a Set operation. The Set will fail or set
the wrong object. If the value syntax of the destination
object is not correct, the Set fails with the normal SNMP
error code."
DEFVAL { zeroDotZero }
::= { mteEventSetEntry 1 }
mteEventSetObjectWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control over whether mteEventSetObject is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard
if mteEventActions has 'set' set."
DEFVAL { false }
::= { mteEventSetEntry 2 }
mteEventSetValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to which to set the object at mteEventSetObject
if mteEventActions has 'set' set."
DEFVAL { 0 }
::= { mteEventSetEntry 3 }
mteEventSetTargetTag OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tag for the target(s) at which to set the object at
mteEventSetObject to mteEventSetValue if mteEventActions
has 'set' set.
Systems limited to self management MAY reject a non-zero
length for the value of this object.
A length of 0 indicates the local system. In this case,
access to the objects indicated by mteEventSetObject is under
the security credentials of the requester that set
mteTriggerEntryStatus to 'active'. Those credentials are the
input parameters for isAccessAllowed from the Architecture for
Describing SNMP Management Frameworks.
Otherwise access rights are checked according to the security
parameters resulting from the tag."
DEFVAL { ''H }
::= { mteEventSetEntry 4 }
mteEventSetContextName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management context in which to set mteEventObjectID.
if mteEventActions has 'set' set.
This may be wildcarded by leaving characters off the end. To
indicate such wildcarding mteEventSetContextNameWildcard must
be 'true'.
If this context name is wildcarded the value used to complete
the wildcarding of mteTriggerContextName will be appended."
DEFVAL { ''H }
::= { mteEventSetEntry 5 }
mteEventSetContextNameWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for whether mteEventSetContextName is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard
if mteEventActions has 'set' set."
DEFVAL { false }
::= { mteEventSetEntry 6 }
--
-- Notifications
--
dismanEventMIBNotificationPrefix OBJECT IDENTIFIER ::=
{ dismanEventMIB 2 }
dismanEventMIBNotifications OBJECT IDENTIFIER ::=
{ dismanEventMIBNotificationPrefix 0 }
dismanEventMIBNotificationObjects OBJECT IDENTIFIER
::= { dismanEventMIBNotificationPrefix 1 }
--
-- Notification Objects
--
mteHotTrigger OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the trigger causing the notification."
::= { dismanEventMIBNotificationObjects 1 }
mteHotTargetName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The SNMP Target MIB's snmpTargetAddrName related to the
notification."
::= { dismanEventMIBNotificationObjects 2 }
mteHotContextName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The context name related to the notification. This MUST be as
fully-qualified as possible, including filling in wildcard
information determined in processing."
::= { dismanEventMIBNotificationObjects 3 }
mteHotOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifier of the destination object related to the
notification. This MUST be as fully-qualified as possible,
including filling in wildcard information determined in
processing.
For a trigger-related notification this is from
mteTriggerValueID.
For a set failure this is from mteEventSetObject."
::= { dismanEventMIBNotificationObjects 4 }
mteHotValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object at mteTriggerValueID when a
trigger fired."
::= { dismanEventMIBNotificationObjects 5 }
mteFailedReason OBJECT-TYPE
SYNTAX FailureReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for the failure of an attempt to check for a
trigger condition or set an object in response to an event."
::= { dismanEventMIBNotificationObjects 6 }
--
-- Notifications
--
mteTriggerFired NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue }
STATUS current
DESCRIPTION
"Notification that the trigger indicated by the object
instances has fired, for triggers with mteTriggerType
'boolean' or 'existence'."
::= { dismanEventMIBNotifications 1 }
mteTriggerRising NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue }
STATUS current
DESCRIPTION
"Notification that the rising threshold was met for triggers
with mteTriggerType 'threshold'."
::= { dismanEventMIBNotifications 2 }
mteTriggerFalling NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue }
STATUS current
DESCRIPTION
"Notification that the falling threshold was met for triggers
with mteTriggerType 'threshold'."
::= { dismanEventMIBNotifications 3 }
mteTriggerFailure NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteFailedReason }
STATUS current
DESCRIPTION
"Notification that an attempt to check a trigger has failed.
The network manager must enable this notification only with
a certain fear and trembling, as it can easily crowd out more
important information. It should be used only to help diagnose
a problem that has appeared in the error counters and can not
be found otherwise."
::= { dismanEventMIBNotifications 4 }
mteEventSetFailure NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteFailedReason }
STATUS current
DESCRIPTION
"Notification that an attempt to do a set in response to an
event has failed.
The network manager must enable this notification only with
a certain fear and trembling, as it can easily crowd out more
important information. It should be used only to help diagnose
a problem that has appeared in the error counters and can not
be found otherwise."
::= { dismanEventMIBNotifications 5 }
--
-- Conformance
--
dismanEventMIBConformance OBJECT IDENTIFIER ::= { dismanEventMIB 3 }
dismanEventMIBCompliances OBJECT IDENTIFIER ::=
{ dismanEventMIBConformance 1 }
dismanEventMIBGroups OBJECT IDENTIFIER ::=
{ dismanEventMIBConformance 2 }
-- Compliance
dismanEventMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Event MIB."
MODULE -- this module
MANDATORY-GROUPS {
dismanEventResourceGroup,
dismanEventTriggerGroup,
dismanEventObjectsGroup,
dismanEventEventGroup,
dismanEventNotificationObjectGroup,
dismanEventNotificationGroup
}
OBJECT mteTriggerTargetTag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus limiting
monitoring to the local system or pre-configured
remote systems."
OBJECT mteEventSetTargetTag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus limiting
setting to the local system or pre-configured
remote systems."
OBJECT mteTriggerValueIDWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
OBJECT mteTriggerContextNameWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
OBJECT mteObjectsIDWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
OBJECT mteEventSetContextNameWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
::= { dismanEventMIBCompliances 1 }
-- Units of Conformance
dismanEventResourceGroup OBJECT-GROUP
OBJECTS {
mteResourceSampleMinimum,
mteResourceSampleInstanceMaximum,
mteResourceSampleInstances,
mteResourceSampleInstancesHigh,
mteResourceSampleInstanceLacks
}
STATUS current
DESCRIPTION
"Event resource status and control objects."
::= { dismanEventMIBGroups 1 }
dismanEventTriggerGroup OBJECT-GROUP
OBJECTS {
mteTriggerFailures,
mteTriggerComment,
mteTriggerTest,
mteTriggerSampleType,
mteTriggerValueID,
mteTriggerValueIDWildcard,
mteTriggerTargetTag,
mteTriggerContextName,
mteTriggerContextNameWildcard,
mteTriggerFrequency,
mteTriggerObjectsOwner,
mteTriggerObjects,
mteTriggerEnabled,
mteTriggerEntryStatus,
mteTriggerDeltaDiscontinuityID,
mteTriggerDeltaDiscontinuityIDWildcard,
mteTriggerDeltaDiscontinuityIDType,
mteTriggerExistenceTest,
mteTriggerExistenceStartup,
mteTriggerExistenceObjectsOwner,
mteTriggerExistenceObjects,
mteTriggerExistenceEventOwner,
mteTriggerExistenceEvent,
mteTriggerBooleanComparison,
mteTriggerBooleanValue,
mteTriggerBooleanStartup,
mteTriggerBooleanObjectsOwner,
mteTriggerBooleanObjects,
mteTriggerBooleanEventOwner,
mteTriggerBooleanEvent,
mteTriggerThresholdStartup,
mteTriggerThresholdObjectsOwner,
mteTriggerThresholdObjects,
mteTriggerThresholdRising,
mteTriggerThresholdFalling,
mteTriggerThresholdDeltaRising,
mteTriggerThresholdDeltaFalling,
mteTriggerThresholdRisingEventOwner,
mteTriggerThresholdRisingEvent,
mteTriggerThresholdFallingEventOwner,
mteTriggerThresholdFallingEvent,
mteTriggerThresholdDeltaRisingEventOwner,
mteTriggerThresholdDeltaRisingEvent,
mteTriggerThresholdDeltaFallingEventOwner,
mteTriggerThresholdDeltaFallingEvent
}
STATUS current
DESCRIPTION
"Event triggers."
::= { dismanEventMIBGroups 2 }
dismanEventObjectsGroup OBJECT-GROUP
OBJECTS {
mteObjectsID,
mteObjectsIDWildcard,
mteObjectsEntryStatus
}
STATUS current
DESCRIPTION
"Supplemental objects."
::= { dismanEventMIBGroups 3 }
dismanEventEventGroup OBJECT-GROUP
OBJECTS {
mteEventFailures,
mteEventComment,
mteEventActions,
mteEventEnabled,
mteEventEntryStatus,
mteEventNotification,
mteEventNotificationObjectsOwner,
mteEventNotificationObjects,
mteEventSetObject,
mteEventSetObjectWildcard,
mteEventSetValue,
mteEventSetTargetTag,
mteEventSetContextName,
mteEventSetContextNameWildcard
}
STATUS current
DESCRIPTION
"Events."
::= { dismanEventMIBGroups 4 }
dismanEventNotificationObjectGroup OBJECT-GROUP
OBJECTS {
mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue,
mteFailedReason
}
STATUS current
DESCRIPTION
"Notification objects."
::= { dismanEventMIBGroups 5 }
dismanEventNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mteTriggerFired,
mteTriggerRising,
mteTriggerFalling,
mteTriggerFailure,
mteEventSetFailure
}
STATUS current
DESCRIPTION
"Notifications."
::= { dismanEventMIBGroups 6 }
END
8. Intellectual Property
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and
standards- related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such
proprietary rights by implementors or users of this specification can
be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
9. Acknowledgements
This MIB contains considerable contributions from the RMON MIB, the
Distributed Management Design Team (Andy Bierman, Maria Greene, Bob
Stewart, and Steve Waldbusser), the Distributed Management Working
Group, and colleagues at Cisco.
10. References
[RFC2571] Harrington, D., Presuhn, R. and B. Wijnen, "An
Architecture for Describing SNMP Management Frameworks",
RFC2571, April 1999.
[RFC1155] Rose, M. and K. McCloghrie, "Structure and Identification
of Management Information for TCP/IP-based Internets",
STD 16, RFC1155, May 1990.
[RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions",
STD 16, RFC1212, March 1991.
[RFC1215] Rose, M., "A Convention for Defining Traps for use with
the SNMP", RFC1215, March 1991.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC2578, April
1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC2580, April 1999.
[RFC1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin,
"Simple Network Management Protocol", STD 15, RFC1157,
May 1990.
[RFC1901] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC1901,
January 1996.
[RFC1906] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC1906, January 1996.
[RFC2572] Case, J., Harrington D., Presuhn R. and B. Wijnen,
"Message Processing and Dispatching for the Simple
Network Management Protocol (SNMP)", RFC2572, April
1999.
[RFC2574] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC2574, April 1999.
[RFC1905] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC1905, January 1996.
[RFC2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3
Applications", RFC2573, April 1999.
[RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC2575, April 1999.
[RFC2570] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction to Version 3 of the Internet-standard
Network Management Framework", RFC2570, April 1999.
[RFC1903] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Coexistence between Version 1 and version 2 of the
Internet-standard Network Management Framework", RFC
1903, January 1996.
[RFC2981] Stewart, B., "Event MIB", RFC2981, October 2000.
[RFC1757] Waldbusser, S., "Remote Network Monitoring Management
Information Base", RFC1757, February 1995.
[RFC1451] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Manager-to- Manager Management Information Base", RFC
1451, April 1993.
[RFC2982] Stewart, B., "Distributed Management Expression MIB", RFC
2982, October 2000.
[LOG-MIB] Stewart, B., "Notification Log MIB", Work in Progress.
11. Security Considerations
Security issues are discussed in the Security section and in the
DESCRIPTION clauses of relevant objects.
12. Author's Address
Bob Stewart
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
U.S.A.
13. Editor's Address
Ramanathan Kavasseri
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
U.S.A.
Phone: +1 408 527 2446
EMail: ramk@cisco.com
14. Full Copyright Statement
Copyright (C) The Internet Society (2000). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFCEditor function is currently provided by the
Internet Society.