-- above structure and "un-comment" the following one prior to
-- compiling this ASN.1 module. (Note that interoperability
-- with implementations that don’t do this will be unaffected by
-- this change.)
-- CMPCertificate ::= Certificate
PKIMessage ::= SEQUENCE {
header PKIHeader,
body PKIBody,
protection [0] PKIProtection OPTIONAL,
extraCerts [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate
OPTIONAL
}
PKIMessages ::= SEQUENCE SIZE (1..MAX) OF PKIMessage
PKIHeader ::= SEQUENCE {
pvno INTEGER { cmp1999(1), cmp2000(2) },
sender GeneralName,
-- identifies the sender
recipient GeneralName,
-- identifies the intended recipient
messageTime [0] GeneralizedTime OPTIONAL,
-- time of production of this message (used when sender
-- believes that the transport will be "suitable"; i.e.,
-- that the time will still be meaningful upon receipt)
protectionAlg [1] AlgorithmIdentifier OPTIONAL,
-- algorithm used for calculation of protection bits
senderKID [2] KeyIdentifier OPTIONAL,
recipKID [3] KeyIdentifier OPTIONAL,
-- to identify specific keys used for protection
transactionID [4] OCTET STRING OPTIONAL,
-- identifies the transaction; i.e., this will be the same in
-- corresponding request, response, certConf, and PKIConf
-- messages
senderNonce [5] OCTET STRING OPTIONAL,
recipNonce [6] OCTET STRING OPTIONAL,
-- nonces used to provide replay protection, senderNonce
-- is inserted by the creator of this message; recipNonce
-- is a nonce previously inserted in a related message by
-- the intended recipient of this message
freeText [7] PKIFreeText OPTIONAL,
-- this may be used to indicate context-specific instructions
-- (this field is intended for human consumption)
generalInfo [8] SEQUENCE SIZE (1..MAX) OF
InfoTypeAndValue OPTIONAL
-- this may be used to convey context-specific information
-- (this field not primarily intended for human consumption)
}
PKIFreeText ::= SEQUENCE SIZE (1..MAX) OF UTF8String
-- text encoded as UTF-8 String [RFC3629] (note: each
-- UTF8String MAY include an [RFC3066] language tag
-- to indicate the language of the contained text
-- see [RFC2482] for details)
PKIBody ::= CHOICE { -- message-specific body elements
ir [0] CertReqMessages, --Initialization Request
ip [1] CertRepMessage, --Initialization Response
cr [2] CertReqMessages, --Certification Request
cp [3] CertRepMessage, --Certification Response
p10cr [4] CertificationRequest, --imported from [PKCS10]
popdecc [5] POPODecKeyChallContent, --pop Challenge
popdecr [6] POPODecKeyRespContent, --pop Response
kur [7] CertReqMessages, --Key Update Request
kup [8] CertRepMessage, --Key Update Response
krr [9] CertReqMessages, --Key Recovery Request
krp [10] KeyRecRepContent, --Key Recovery Response
rr [11] RevReqContent, --Revocation Request
rp [12] RevRepContent, --Revocation Response
ccr [13] CertReqMessages, --Cross-Cert. Request
ccp [14] CertRepMessage, --Cross-Cert. Response
ckuann [15] CAKeyUpdAnnContent, --CA Key Update Ann.
cann [16] CertAnnContent, --Certificate Ann.
rann [17] RevAnnContent, --Revocation Ann.
crlann [18] CRLAnnContent, --CRL Announcement
pkiconf [19] PKIConfirmContent, --Confirmation
nested [20] NestedMessageContent, --Nested Message
genm [21] GenMsgContent, --General Message
genp [22] GenRepContent, --General Response
error [23] ErrorMsgContent, --Error Message
certConf [24] CertConfirmContent, --Certificate confirm
pollReq [25] PollReqContent, --Polling request
pollRep [26] PollRepContent --Polling response
}
PKIProtection ::= BIT STRING
ProtectedPart ::= SEQUENCE {
header PKIHeader,
body PKIBody
}
id-PasswordBasedMac OBJECT IDENTIFIER ::= {1 2 840 113533 7 66 13}
PBMParameter ::= SEQUENCE {
salt OCTET STRING,
-- note: implementations MAY wish to limit acceptable sizes
-- of this string to values appropriate for their environment
-- in order to reduce the risk of denial-of-service attacks
owf AlgorithmIdentifier,
-- AlgId for a One-Way Function (SHA-1 recommended)
iterationCount INTEGER,
-- number of times the OWF is applied
-- note: implementations MAY wish to limit acceptable sizes
-- of this integer to values appropriate for their environment
-- in order to reduce the risk of denial-of-service attacks
mac AlgorithmIdentifier
-- the MAC AlgId (e.g., DES-MAC, Triple-DES-MAC [PKCS11],
} -- or HMAC [RFC2104, RFC2202])
id-DHBasedMac OBJECT IDENTIFIER ::= {1 2 840 113533 7 66 30}
DHBMParameter ::= SEQUENCE {
owf AlgorithmIdentifier,
-- AlgId for a One-Way Function (SHA-1 recommended)
mac AlgorithmIdentifier
-- the MAC AlgId (e.g., DES-MAC, Triple-DES-MAC [PKCS11],
} -- or HMAC [RFC2104, RFC2202])
NestedMessageContent ::= PKIMessages
PKIStatus ::= INTEGER {
accepted (0),
-- you got exactly what you asked for
grantedWithMods (1),
-- you got something like what you asked for; the
-- requester is responsible for ascertaining the differences
rejection (2),
-- you don’t get it, more information elsewhere in the message
waiting (3),
-- the request body part has not yet been processed; expect to
-- hear more later (note: proper handling of this status
-- response MAY use the polling req/rep PKIMessages specified
-- in Section 5.3.22; alternatively, polling in the underlying
-- transport layer MAY have some utility in this regard)
revocationWarning (4),
-- this message contains a warning that a revocation is
-- imminent
revocationNotification (5),
-- notification that a revocation has occurred
keyUpdateWarning (6)
-- update already done for the oldCertId specified in
-- CertReqMsg
}
PKIFailureInfo ::= BIT STRING {
-- since we can fail in more than one way!
-- More codes may be added in the future if/when required.
badAlg (0),
-- unrecognized or unsupported Algorithm Identifier
badMessageCheck (1),
-- integrity check failed (e.g., signature did not verify)
badRequest (2),
-- transaction not permitted or supported
badTime (3),
-- messageTime was not sufficiently close to the system time,
-- as defined by local policy
badCertId (4),
-- no certificate could be found matching the provided criteria
badDataFormat (5),
-- the data submitted has the wrong format
wrongAuthority (6),
-- the authority indicated in the request is different from the
-- one creating the response token
incorrectData (7),
-- the requester’s data is incorrect (for notary services)
missingTimeStamp (8),
-- when the timestamp is missing but should be there
-- (by policy)
badPOP (9),
-- the proof-of-possession failed
certRevoked (10),
-- the certificate has already been revoked
certConfirmed (11),
-- the certificate has already been confirmed
wrongIntegrity (12),
-- invalid integrity, password based instead of signature or
-- vice versa
badRecipientNonce (13),
-- invalid recipient nonce, either missing or wrong value
timeNotAvailable (14),
-- the TSA’s time source is not available
unacceptedPolicy (15),
-- the requested TSA policy is not supported by the TSA.
unacceptedExtension (16),
-- the requested extension is not supported by the TSA.
addInfoNotAvailable (17),
-- the additional information requested could not be
-- understood or is not available
badSenderNonce (18),
-- invalid sender nonce, either missing or wrong size
badCertTemplate (19),
-- invalid cert. template or missing mandatory information
signerNotTrusted (20),
-- signer of the message unknown or not trusted
transactionIdInUse (21),
-- the transaction identifier is already in use
unsupportedVersion (22),
-- the version of the message is not supported
notAuthorized (23),
-- the sender was not authorized to make the preceding
-- request or perform the preceding action
systemUnavail (24),
-- the request cannot be handled due to system unavailability
systemFailure (25),
-- the request cannot be handled due to system failure
duplicateCertReq (26)
-- certificate cannot be issued because a duplicate
-- certificate already exists
}
PKIStatusInfo ::= SEQUENCE {
status PKIStatus,
statusString PKIFreeText OPTIONAL,
failInfo PKIFailureInfo OPTIONAL
}
OOBCert ::= CMPCertificate
OOBCertHash ::= SEQUENCE {
hashAlg [0] AlgorithmIdentifier OPTIONAL,
certId [1] CertId OPTIONAL,
hashVal BIT STRING
-- hashVal is calculated over the DER encoding of the
-- self-signed certificate with the identifier certID.
}
POPODecKeyChallContent ::= SEQUENCE OF Challenge
-- One Challenge per encryption key certification request (in the
-- same order as these requests appear in CertReqMessages).
Challenge ::= SEQUENCE {
owf AlgorithmIdentifier OPTIONAL,
-- MUST be present in the first Challenge; MAY be omitted in
-- any subsequent Challenge in POPODecKeyChallContent (if
-- omitted, then the owf used in the immediately preceding
-- Challenge is to be used).
witness OCTET STRING,
-- the result of applying the one-way function (owf) to a
-- randomly-generated INTEGER, A. [Note that a different
-- INTEGER MUST be used for each Challenge.]
challenge OCTET STRING
-- the encryption (under the public key for which the cert.
-- request is being made) of Rand, where Rand is specified as
-- Rand ::= SEQUENCE {
-- int INTEGER,
-- - the randomly-generated INTEGER A (above)
-- sender GeneralName
-- - the sender’s name (as included in PKIHeader)
-- }
}
POPODecKeyRespContent ::= SEQUENCE OF INTEGER
-- One INTEGER per encryption key certification request (in the
-- same order as these requests appear in CertReqMessages). The
-- retrieved INTEGER A (above) is returned to the sender of the
-- corresponding Challenge.
CertRepMessage ::= SEQUENCE {
caPubs [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate
OPTIONAL,
response SEQUENCE OF CertResponse
}
CertResponse ::= SEQUENCE {
certReqId INTEGER,
-- to match this response with corresponding request (a value
-- of -1 is to be used if certReqId is not specified in the
-- corresponding request)
status PKIStatusInfo,
certifiedKeyPair CertifiedKeyPair OPTIONAL,
rspInfo OCTET STRING OPTIONAL
-- analogous to the id-regInfo-utf8Pairs string defined
-- for regInfo in CertReqMsg [CRMF]
}
CertifiedKeyPair ::= SEQUENCE {
certOrEncCert CertOrEncCert,
privateKey [0] EncryptedValue OPTIONAL,
-- see [CRMF] for comment on encoding
publicationInfo [1] PKIPublicationInfo OPTIONAL
}
CertOrEncCert ::= CHOICE {
certificate [0] CMPCertificate,
encryptedCert [1] EncryptedValue
}
KeyRecRepContent ::= SEQUENCE {
status PKIStatusInfo,
newSigCert [0] CMPCertificate OPTIONAL,
caCerts [1] SEQUENCE SIZE (1..MAX) OF
CMPCertificate OPTIONAL,
keyPairHist [2] SEQUENCE SIZE (1..MAX) OF
CertifiedKeyPair OPTIONAL
}
RevReqContent ::= SEQUENCE OF RevDetails
RevDetails ::= SEQUENCE {
certDetails CertTemplate,
-- allows requester to specify as much as they can about
-- the cert. for which revocation is requested
-- (e.g., for cases in which serialNumber is not available)
crlEntryDetails Extensions OPTIONAL
-- requested crlEntryExtensions
}
RevRepContent ::= SEQUENCE {
status SEQUENCE SIZE (1..MAX) OF PKIStatusInfo,
-- in same order as was sent in RevReqContent
revCerts [0] SEQUENCE SIZE (1..MAX) OF CertId
OPTIONAL,
-- IDs for which revocation was requested
-- (same order as status)
crls [1] SEQUENCE SIZE (1..MAX) OF CertificateList
OPTIONAL
-- the resulting CRLs (there may be more than one)
}
CAKeyUpdAnnContent ::= SEQUENCE {
oldWithNew CMPCertificate, -- old pub signed with new priv
newWithOld CMPCertificate, -- new pub signed with old priv
newWithNew CMPCertificate -- new pub signed with new priv
}
CertAnnContent ::= CMPCertificate
RevAnnContent ::= SEQUENCE {
status PKIStatus,
certId CertId,
willBeRevokedAt GeneralizedTime,
badSinceDate GeneralizedTime,
crlDetails Extensions OPTIONAL
-- extra CRL details (e.g., crl number, reason, location, etc.)
}
CRLAnnContent ::= SEQUENCE OF CertificateList
CertConfirmContent ::= SEQUENCE OF CertStatus
CertStatus ::= SEQUENCE {
certHash OCTET STRING,
-- the hash of the certificate, using the same hash algorithm
-- as is used to create and verify the certificate signature
certReqId INTEGER,
-- to match this confirmation with the corresponding req/rep
statusInfo PKIStatusInfo OPTIONAL
}
PKIConfirmContent ::= NULL
InfoTypeAndValue ::= SEQUENCE {
infoType OBJECT IDENTIFIER,
infoValue ANY DEFINED BY infoType OPTIONAL
}
-- Example InfoTypeAndValue contents include, but are not limited
-- to, the following (un-comment in this ASN.1 module and use as
-- appropriate for a given environment):
--
-- id-it-caProtEncCert OBJECT IDENTIFIER ::= {id-it 1}
-- CAProtEncCertValue ::= CMPCertificate
-- id-it-signKeyPairTypes OBJECT IDENTIFIER ::= {id-it 2}
-- SignKeyPairTypesValue ::= SEQUENCE OF AlgorithmIdentifier
-- id-it-encKeyPairTypes OBJECT IDENTIFIER ::= {id-it 3}
-- EncKeyPairTypesValue ::= SEQUENCE OF AlgorithmIdentifier
-- id-it-preferredSymmAlg OBJECT IDENTIFIER ::= {id-it 4}
-- PreferredSymmAlgValue ::= AlgorithmIdentifier
-- id-it-caKeyUpdateInfo OBJECT IDENTIFIER ::= {id-it 5}
-- CAKeyUpdateInfoValue ::= CAKeyUpdAnnContent
-- id-it-currentCRL OBJECT IDENTIFIER ::= {id-it 6}
-- CurrentCRLValue ::= CertificateList
-- id-it-unsupportedOIDs OBJECT IDENTIFIER ::= {id-it 7}
-- UnsupportedOIDsValue ::= SEQUENCE OF OBJECT IDENTIFIER
-- id-it-keyPairParamReq OBJECT IDENTIFIER ::= {id-it 10}
-- KeyPairParamReqValue ::= OBJECT IDENTIFIER
-- id-it-keyPairParamRep OBJECT IDENTIFIER ::= {id-it 11}
-- KeyPairParamRepValue ::= AlgorithmIdentifer
-- id-it-revPassphrase OBJECT IDENTIFIER ::= {id-it 12}
-- RevPassphraseValue ::= EncryptedValue
-- id-it-implicitConfirm OBJECT IDENTIFIER ::= {id-it 13}
-- ImplicitConfirmValue ::= NULL
-- id-it-confirmWaitTime OBJECT IDENTIFIER ::= {id-it 14}
-- ConfirmWaitTimeValue ::= GeneralizedTime
-- id-it-origPKIMessage OBJECT IDENTIFIER ::= {id-it 15}
-- OrigPKIMessageValue ::= PKIMessages
-- id-it-suppLangTags OBJECT IDENTIFIER ::= {id-it 16}
-- SuppLangTagsValue ::= SEQUENCE OF UTF8String
--
-- where
--
-- id-pkix OBJECT IDENTIFIER ::= {
-- iso(1) identified-organization(3)
-- dod(6) internet(1) security(5) mechanisms(5) pkix(7)}
-- and
-- id-it OBJECT IDENTIFIER ::= {id-pkix 4}
--
--
-- This construct MAY also be used to define new PKIX Certificate
-- Management Protocol request and response messages, or general-
-- purpose (e.g., announcement) messages for future needs or for
-- specific environments.
GenMsgContent ::= SEQUENCE OF InfoTypeAndValue
-- May be sent by EE, RA, or CA (depending on message content).
-- The OPTIONAL infoValue parameter of InfoTypeAndValue will
-- typically be omitted for some of the examples given above.
-- The receiver is free to ignore any contained OBJ. IDs that it
-- does not recognize. If sent from EE to CA, the empty set
-- indicates that the CA may send