DEFVAL { false }
::= { t11FamEntry 25 }
t11FamEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the Fabric Address Manager on this switch
on this Fabric.
If enabled on a Fabric, the switch will participate in
Principal Switch selection, and Domain_IDs are assigned
dynamically. If disabled, the switch will not participate
in Principal Switch selection, and Domain_IDs are
assigned statically. Thus, the corresponding value of
t11FamConfigDomainIdType needs to be ’static’.
For the persistence of values across reboots, see the
MODULE-IDENTITY’s DESCRIPTION clause."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
ANSI INCITS 418-2006, sections 7.1 and 7.3."
DEFVAL { true }
::= { t11FamEntry 26 }
t11FamFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WWN that is configured on this switch to be used as
the name of this Fabric when the value of t11FamEnable is
’false’.
If the value of t11FamEnable is ’true’, this value is not
used.
Fibre Channel requires that:
a) all switches in an operational Fabric be
configured with the same Fabric name; and
b) each Fabric have a unique Fabric name.
If either of these is violated, either by switches within a
single Fabric being configured with different Fabric names,
or by multiple Fabrics that share management applications
or interact in other ways having the same Fabric name,
then the behavior of the switches and associated management
functions is not specified by Fibre Channel or Internet
standards.
For the persistence of values across reboots, see the
MODULE-IDENTITY’s DESCRIPTION clause."
REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
ANSI INCITS 418-2006, section 7.1."
::= { t11FamEntry 27 }
--
-- t11FamIfTable - Interface configuration
--
t11FamIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains those Fabric Address Manager parameters
and status values that are per-interface (identified
by an ifIndex value), per-Fabric (identified by a
t11FamFabricIndex value), and per-switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex).
An entry in this table is automatically created when
an E_Port becomes non-isolated on a particular Fabric.
An entry is deleted automatically from this table if:
a) the corresponding interface is no longer an E_Port (e.g.,
a G_Port that is dynamically determined to be an F_Port),
and all configuration parameter(s) have default values; or
b) the interface identified by ifIndex no longer exists
(e.g., because a line-card is physically removed); or
c) the row in the t11FamTable corresponding the fabric
identified by t11FamFabricID no longer exists.
Creating an entry in this table via t11FamIfRowStatus
provides the means to specify non-default parameter value(s)
for an interface at a time when the relevant row in this
table does not exist, i.e., because the interface is either
down or it is not an E_Port."
::= { t11FamConfiguration 2 }
t11FamIfEntry OBJECT-TYPE
SYNTAX T11FamIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information on the interface
configuration on the Fabric identified by
t11FamFabricIndex."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FamFabricIndex, ifIndex}
::= { t11FamIfTable 1 }
T11FamIfEntry ::= SEQUENCE {
t11FamIfRcfReject TruthValue,
t11FamIfRole T11FamDomainInterfaceRole,
t11FamIfRowStatus RowStatus
}
t11FamIfRcfReject OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object determines if the incoming ReConfigure
Fabric (RCF) messages on this interface on this
Fabric is accepted or not. If this object is ’true’, then
the incoming RCF is rejected. If ’false’, incoming RCF is
accepted.
Note that this object does not apply to the outgoing
RCFs generated by this interface.
Implementations that support write-access to this object
can do so under whatever conditions they choose."
DEFVAL {false}
::= { t11FamIfEntry 1 }
t11FamIfRole OBJECT-TYPE
SYNTAX T11FamDomainInterfaceRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of this interface."
::= { t11FamIfEntry 2 }
t11FamIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row."
::= { t11FamIfEntry 3 }
--
-- t11FamAreaTable
--
t11FamAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains area assignments per-Fabric by a
switch’s Fabric Address Manager. Each octet in
t11FamAssignedAreaList is able to be used to index into
this table to find information on each area."
REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
ANSI INCITS 384-2004, section 4.8."
::= { t11FamInfo 1 }
t11FamAreaEntry OBJECT-TYPE
SYNTAX T11FamAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry gives information on the Area_ID and all
Port_IDs that have been assigned within an area for
the Fabric identified by t11FamFabricIndex, by the
Fabric Address Manager in the switch identified by
fcmInstanceIndex and fcmSwitchIndex."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FamFabricIndex, t11FamAreaAreaId}
::= { t11FamAreaTable 1 }
T11FamAreaEntry ::= SEQUENCE {
t11FamAreaAreaId Unsigned32,
t11FamAreaAssignedPortIdList OCTET STRING
}
t11FamAreaAreaId OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area_ID of this area."
::= { t11FamAreaEntry 1 }
t11FamAreaAssignedPortIdList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of Port_IDs which have been assigned in
this area and Fabric, formatted as an array of
octets in ascending order. There could be zero or more
Port_IDs assigned on this area and Fabric.
Each octet represents one Port_ID. So, the list containing
the Port_IDs 23, 45, 235, and 56 would be formatted as the
4-octet string x’172d38eb’."
::= { t11FamAreaEntry 2 }
--
-- t11FamDatabaseTable
--
t11FamDatabaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all information known by
a switch about all the domains that have been
assigned in each Fabric."
REFERENCE "Fibre Channel - Switch Fabric - 3 (FC-SW-3),
ANSI INCITS 384-2004, section 4.8."
::= { t11FamInfo 2 }
t11FamDatabaseEntry OBJECT-TYPE
SYNTAX T11FamDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the t11FamDatabaseTable
containing information about one Domain_ID in the
Fabric identified by t11FamFabricIndex, and known by
the switch identified by t11FamFabricIndex and
t11FamDatabaseDomainId."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FamFabricIndex , t11FamDatabaseDomainId}
::= { t11FamDatabaseTable 1 }
T11FamDatabaseEntry ::= SEQUENCE {
t11FamDatabaseDomainId FcDomainIdOrZero,
t11FamDatabaseSwitchWwn FcNameIdOrZero
}
t11FamDatabaseDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero (1..239)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Domain_ID for which this row contains information.
The value must be non-zero."
::= { t11FamDatabaseEntry 1 }
t11FamDatabaseSwitchWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name (WWN) of the switch to which the
corresponding value of t11FamDatabaseDomainId is currently
assigned for the particular Fabric."
::= { t11FamDatabaseEntry 2 }
--
-- Fibre Channel Address Identifier cache information
--
-- The cached information allows the Fabric Address Manager to
-- implement the concept of a Preferred Domain_ID, whereby after a port
-- releases a Fibre Channel Address Identifier value, a switch makes an
-- attempt to re-assign the same Fibre Channel Address Identifier value
-- on the next occasion when that port requests an assignment.
--
t11FamMaxFcIdCacheSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of Fibre Channel Address Identifiers
that are able to be cached in the t11FamFcIdCacheTable.
If the number is unknown, the value of this object is
zero."
::= { t11FamInfo 3 }
--
-- t11FamFcIdCacheTable
--
t11FamFcIdCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FamFcIdCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the Fibre Channel Address
Identifiers that have recently been released by the
Fabric Address Manager in a switch. So, it lists
all the Fibre Channel Address Identifiers that have valid
WWN-to-Fibre Channel Address Identifier mappings and are
currently not assigned to any ports. These Fibre Channel
Address Identifiers were assigned to ports but have since
been released. These cached Fibre Channel Address
Identifiers contain only Area_ID and Port_ID information.
This cache is kept to provide best-effort re-assignment of
same Fibre Channel Address Identifiers; i.e., when an
Nx_Port asks for a Fibre Channel Address Identifier, soon
after releasing one, the same value is re-assigned, if
possible."
::= { t11FamInfo 4 }
t11FamFcIdCacheEntry OBJECT-TYPE
SYNTAX T11FamFcIdCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the t11FamFcIdCacheTable
containing information about one Fibre Channel Address
Identifier that was released from a WWN, corresponding to a
range of one or more ports connected to the switch
(identified by t11FamFabricIndex and t11FamFcIdCacheWwn) in
the Fabric (identified by t11FamFabricIndex). An entry is
created when a Fibre Channel Address Identifier is released
by the last port in the range. The oldest entry is deleted
if the number of rows in this table reaches
t11FamMaxFcIdCacheSize, and its space is required for a new
entry. An entry is also deleted when its Fibre Channel
Address Identifier is assigned to a port."
INDEX { fcmInstanceIndex, fcmSwitchIndex,
t11FamFabricIndex, t11FamFcIdCacheWwn}
::= { t11FamFcIdCacheTable 1 }
T11FamFcIdCacheEntry ::= SEQUENCE {
t11FamFcIdCacheWwn FcNameIdOrZero,
t11FamFcIdCacheAreaIdPortId OCTET STRING,
t11FamFcIdCachePortIds Unsigned32
}
t11FamFcIdCacheWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The N_Port_Name (WWN) of the port associated with this
entry."
::= { t11FamFcIdCacheEntry 1 }
t11FamFcIdCacheAreaIdPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of this object and t11FamFcIdCachePortIds
represent one range of Fibre Channel Address Identifiers,
which were assigned and later released. This object
contains the Area_ID and Port_ID of the first Fibre
Channel Address Identifier in the range.
Note that this object is only 2 bytes."
::= { t11FamFcIdCacheEntry 2 }
t11FamFcIdCachePortIds OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of t11FamFcIdCacheAreaIdPortId and this
object represent one range of Fibre Channel Address
Identifiers, which were assigned and later released. This
object contains the number of (consecutive) Fibre Channel
Address Identifiers in the range."
::= { t11FamFcIdCacheEntry 3 }
-- Objects for use in notifications
t11FamNotifyFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A unique index value that identifies a particular
Fabric for which a particular notification is generated.
In a Fabric conformant to SW-3, only a single Fabric
can operate within a physical infrastructure, and thus,
the value of this Fabric Index will always be 1.
However, the current standard, FC-SW-4, defines
how multiple Fabrics, each with its own management
instrumentation, could operate within one (or more)
physical infrastructures. In order to accommodate this
scenario, this index value is used to uniquely identify a
particular Fabric within a physical infrastructure."
::= { t11FamNotifyControl 1 }
-- Notifications
t11FamDomainIdNotAssignedNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex }
STATUS current
DESCRIPTION
"This notification indicates that a Domain_ID has not
been configured or assigned for a particular Fabric,
identified by t11FamNotifyFabricIndex, on a particular
switch identified by t11FamLocalSwitchWwn. This could
happen under the following conditions, and results in the
switch isolating E_Ports on the Fabric:
- if the switch’s request for a configured static
Domain_ID is rejected or no other Domain_ID is
assigned, then the E_Ports are isolated."
::= { t11FamNotifications 1 }
t11FamNewPrincipalSwitchNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex }
STATUS current
DESCRIPTION
"This notification indicates that a particular switch,
identified by t11FamLocalSwitchWwn, has become the new
Principal Switch on the Fabric identified by
t11FamNotifyFabricIndex.
This notification is sent soon after its election as
the new Principal Switch, i.e., upon expiration of a
Principal Switch selection timer that is equal to
twice the Fabric Stability Timeout value (F_S_TOV)."
::= { t11FamNotifications 2 }
t11FamFabricChangeNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn, t11FamNotifyFabricIndex }
STATUS current
DESCRIPTION
"This notification is sent whenever a particular switch,
identified by t11FamLocalSwitchWwn, sends or
receives a Build Fabric (BF) or a ReConfigure Fabric
(RCF) message on the Fabric identified by
t11FamNotifyFabricIndex.
This notification is not sent if a
’t11FamNewPrincipalSwitchNotify’ notification is sent
for the same event."
::= { t11FamNotifications 3 }
--
-- Conformance
--
t11FamMIBCompliances OBJECT IDENTIFIER ::= { t11FamMIBConformance 1 }
t11FamMIBGroups OBJECT IDENTIFIER ::= { t11FamMIBConformance 2 }
t11FamMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Fibre Channel switches
that implement Fabric Address Manager functionality."
MODULE
MANDATORY-GROUPS { t11FamGroup,
t11FamDatabaseGroup,
t11FamAreaGroup,
t11FamNotificationGroup
}
OBJECT t11FamConfigDomainId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FamConfigDomainIdType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FamAutoReconfigure
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FamContiguousAllocation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FamPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FamIfRcfReject
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FamIfRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FamRcFabricNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
GROUP t11FamCacheGroup
DESCRIPTION
"This group is mandatory only for switches that
support the concept of Preferred Domain_ID via a best-
effort attempt for (short-term) re-assignment of the
same FC address identifiers."
GROUP t11FamCommandGroup
DESCRIPTION
"This group is optional."
::= { t11FamMIBCompliances 1 }
-- Units of Conformance
t11FamGroup OBJECT-GROUP
OBJECTS { t11FamConfigDomainId,
t11FamConfigDomainIdType,
t11FamAutoReconfigure,
t11FamContiguousAllocation,
t11FamPriority,
t11FamPrincipalSwitchWwn,
t11FamLocalSwitchWwn,
t11FamAssignedAreaIdList,
t11FamGrantedFcIds,
t11FamRecoveredFcIds,
t11FamFreeFcIds,
t11FamAssignedFcIds,
t11FamAvailableFcIds,
t11FamRunningPriority,
t11FamPrincSwRunningPriority,
t11FamState,
t11FamLocalPrincipalSwitchSlctns,
t11FamPrincipalSwitchSelections,
t11FamBuildFabrics,
t11FamFabricReconfigures,
t11FamDomainId,
t11FamSticky,
t11FamRestart,
t11FamRcFabricNotifyEnable,
t11FamEnable,
t11FamFabricName,
t11FamIfRcfReject,
t11FamIfRole,
t11FamIfRowStatus,
t11FamNotifyFabricIndex
}
STATUS current
DESCRIPTION
"A collection of general objects for displaying and
configuring Fabric Address management."
::= { t11FamMIBGroups 1 }
t11FamCommandGroup OBJECT-GROUP
OBJECTS { t11FamRestart }
STATUS current
DESCRIPTION
"A collection of objects used for initiating an
operation on the Fabric."
::= { t11FamMIBGroups 2 }
t11FamDatabaseGroup OBJECT-GROUP
OBJECTS { t11FamDatabaseSwitchWwn }
STATUS current
DESCRIPTION
"A collection of objects containing information about
Domain-IDs assignments."
::= { t11FamMIBGroups 3 }
t11FamAreaGroup OBJECT-GROUP
OBJECTS { t11FamAreaAssignedPortIdList }
STATUS current